Pigeon GoMini - 1.8 About the bottle and nipple

12
1.8 About the bottle and nipple
Place the nipple
inside the cap
Attach the cap and
nipple to the bottle
Fasten securely Cover the nipple
with the hood
Please assemble the parts.
(Refer to pages 4-6)
※ Parts are hot immediately after sterilizing. Please use caution to avoid injury.
Microwave sterilization
• Please use containers designed specifi cally
for microwave sterilizing.
• Do not place parts directly in the microwave
for sterilization.
• Please follow the operating instructions for
your microwave.
• Ensure the container is fi lled with water
during heating.
Steam sterilization
• It is recommended to use a PIGEON steam sterilizer
for steam sterilization.
• When using an electric steam sterilizer, please
follow its operating instructions.
Other sterilization methods
• Do not use dry heat, UV or a dishwasher/dryer to sterilize
the parts. Doing so may cause deformation or damage.
Risk of
scalding
1.7
How to wash and sterilize
How to assemble nipple and cap