Need help?Do you have a question about the pigtronix Infinity looper and is the answer not in the manual?
General| Sample Rate | 48kHz |
|---|---|
| Outputs | 2 x 1/4" |
| Power Supply | 9V DC power supply (included) |
| Type | Looper Pedal |
| Bypass | True bypass |
| Undo/Redo | Yes |
| Reverse Playback | Yes |
| Half-Speed Playback | Yes |
| Input Impedance | 1M Ohm |
| Weight | 1.5 lbs |
| MIDI | In/Out |
| Number of Loops | 2 |
| Inputs | 2 x 1/4" (instrument) |
Controls looping actions for Loop 1 and Loop 2.
Switches for Stop Mode, Arm/All, and Fade modes.
Isolates Loop 1 and Loop 2 to separate audio channels.
Features like Series Loops and Sync Multi.
Controls for Master Volume, Preset, and Loop Volumes.
Detailed functions of Preset and Loop Volume knobs.
Explains DC Power, Inputs 1 & 2.
Details on the main pass-through/loop output jack.
Details on Output 2 and Aux Out connections.
Explains Undo and Expression inputs.
Explains the MIDI In connection for sync and control.
Explains USB connection for data and updates.
Details on Loop, Stop, and Clip LEDs.
Explains display segments and decimal point indicator.
Steps for arming loops for commands.
Detailed steps for recording audio onto loops.
Transitioning between recording loops and starting playback.
Commands for stopping playback and erasing loops.
Procedure for erasing recorded loop audio.
Process of adding layers to existing loops.
Synchronizing Loop 2 length as a multiple of Loop 1.
How to play loops in series mode.
Explains Trails and Fade modes for loop switching.
How overdubs behave in Series mode with Trails/Fade.
Isolating inputs for separate loop recording.
Steps to load presets using the encoder.
Procedures for saving and copying presets.
How to erase saved audio from a preset.
Controls feedback decay for loops.
Crossfade feature for loop boundaries.
Adjusting pitch and speed of looped audio.
Setting for MIDI downbeat reset.
Boot options for mono output and stutter effect.
Erases presets and audio to reformat the card.
Triggers reverse playback and toggles direction.
Undoes overdub recordings.
Redoes undone overdub recordings.
Transition from recording to overdub playback.
Quick erase and Varispeed remote control menu.
Using the pedal for overall loop volume.
Controls feedback decay for loops via expression pedal.
Controls Varispeed sample rate using the expression pedal.
Configuring the pedal's function.
Syncing the looper with MIDI beat clocks.
Sets time signature and commands quantized to MIDI clock.
MIDI commands not quantized to beat clock.
General MIDI mapping and control types.
Real-time MIDI messages for Stop and Start.
Using MIDI notes for Varispeed control.
Updating firmware using the application.
Updating firmware via file transfer.
Minimum and maximum recording times based on SD card.
To Next Page