Pilot Communications BluLink - Making and Receiving Calls; Reconnecting Previously Paired Devices; Using the Answer;End Call Button; Using Redial;Voice Dial Button

To Next Page

To Previous Page

Reconnecting previously paired devices

to BluLink

Once a device has been paired with BluLink, you can reestablish

a connection to the device by turning BluLink on and holding the

button until the blue light ﬂashes 3 times.

Making and Receiving Calls

You can use your phone as normal for all dialing and call receiving

procedures.However,BluLinkenablesyoutohavesomeofthe

phone’s controls directly at your ﬁnger touch without having the phone

in your reach.

Using the answer/end call button

• Pushbuttononcetoanswerincomingphonecall

• Pushbuttononceduringcalltoendphonecall

• Torejectthecallpushbuttontwicebriey

Using redial/ voice dial button

• Pressbuttontwicebrieytorediallastnumber

• Pressandholdbuttonfor2secondsthenspeakthenameor

command (only works if you have voice activation set up in your

phone)

Note: Some phones do not support all the features listed.