Included Hardware:
• Complete air frame with all basic accessories (such as carbon fibre main
undercarriage, tail-gear assembly and wing-tube as well as fibreglass control
horns and wheel pants)
• Ready to install hinges and pre-mounted canopy
• Wheels, axels and wheel pants
• Pushrods with ball links
• Matching plastic spinner
• Wing bags
• Servo extension wires
Propeller: 15x8E
Also requires all the usual accessories such as transmitter, receiver, propeller,
batteries, powerbox, extension leads and possibly other small accessories.
Engine Option 1 : Gasoline
Transmitters and Receivers
Transmitters and Receivers
Gasoline engine - 20cc ) (for example DLE-20RA)
Servos (5pcs) (for example Pilot-RC PY-20AL)
Batteries of your choice - RX and / or Ignition
Engine Option 2: Electric
Transmitters and Receivers
Servos (4pcs) (for example Pilot-RC PY-20AL)
Electric motor (Pilot-RC CC20/400KV motor)
ESC (100A )
Batteries of your choice (3300-4500mah 6S 22.2V 35C lipo battery)
Other Accessories Needed To Complete:
• Epoxy Adhesives
• Cyanocrylate adhesives
• X-Acto and Saw knives
• Sandpaper
• Thread lock
• Aircraft stand or support
• Drill, screw drivers, allen keys, wrench set, pliers, etc
To Next Page
Loading...
