EasyManua.ls Logo

Pilot RC Decathlon User Manual

Pilot RC Decathlon
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
www.pilotwww.pilot--rc.comrc.com
Wingspan: 88 in
Wingarea: 1479.8 sp in
Length: 78.8 in
Engine: 50CC
Assembly Manual for
Decathlon 107”Decathlon 107”--180”180”
Question and Answer IconNeed help?

Do you have a question about the Pilot RC Decathlon and is the answer not in the manual?

Pilot RC Decathlon Specifications

General IconGeneral
BrandPilot RC
ModelDecathlon
CategoryToy
TypeAirplane
Wingspan1400mm
Length1100mm
Skill LevelIntermediate

Summary

Introduction

Warranty

Attention

Rudder Assembly

Rudder Control Horn Installation

Installation of the control horn onto the rudder using epoxy and locking plates.

Tail Wheel Assembly

Tail Wheel Installation

Process for installing the tail wheel assembly onto the fuselage.

Landing Gear Assembly

Main Landing Gear Installation

Steps for mounting the main landing gear struts and wheels to the aircraft.

Wheel Pant Installation

Mounting the wheel pants over the main landing gear wheels.

Wing Servos

Wing Servo Arm Installation

Attaching servo arms to the wing servos, ensuring proper centering.

Aileron Control Horns

Installing control horns for the aileron surfaces on the wing.

Wing Servo Installation

Mounting servos in the wing and connecting control linkages.

Rudder Servo Assembly

Rudder Servo Installation

Mounting the rudder servo and connecting the control linkage using cables.

Elevator Servo Assembly

Elevator Servo Arm Installation

Attaching servo arms to the elevator servos, ensuring proper centering.

Elevator Control Horns

Installing control horns for the elevator surfaces.

Elevator Servo Installation

Mounting servos in the fuselage and connecting control linkages.

Engine Installation

Engine Assembly

Engine Installation

Final mounting of the engine using mounting screws and blue Loctite.

Throttle Servo Installation

Ignition Module Installation

Hatch and Fuel Tank

Engine Box Hatch Installation

Securing the engine box hatch using screws.

Fuel Tank Mounting

Mounting the fuel tank with Velcro straps and securing fuel lines.

Cowl Assembly

Final Assembly

Switch Assembly

Mounting the electrical switch in the fuselage.

Wing Assembly

Wing Brackets Installation

Installing mounting brackets on the underside of the wing.

Lift Strut Assembly

Assembling and mounting the lift strut components to the wing.

Elevator Assembly

Tail Brackets and Cable Connections

Installing tail brackets and connecting elevator control cables.

CG and Control Throws

Center of Gravity Setup

Setting the initial center of gravity for the first flight.

First Flight Control Throws

Recommended control surface throws for the initial flight setup.

Flight Preparation

LED Assembly Option

LED Lighting Kit Installation

Instructions for installing the optional LED lighting kit.

Control Horn Installation

Wing & Elevator Servo Installation

Optional Rudder Installation

Related product manuals