Pilot RC 30cc 88" Skywolf User Manual

www.pilot-rc.com
Wingspan: 88 in
Wingarea: 1479.8 sp in
Length: 78.8 in
Engine: 50CC
Assembly Manual For
30cc 88” Skywolf
Note: some photos on the manual is not from
Skywolf. But the installation way is the same.

Pilot RC 30cc 88" Skywolf Specifications

General

Brand	Pilot RC
Model	30cc 88" Skywolf
Category	Toy
Language	English

Summary

Introduction

Warranty

Attention

Stabilizer/Elevator Assembly

Vertical Tail/Rudder Assembly

Elevator Servo Assembly

Servo Arm Installation

Instructions for attaching and setting up the servo arm for the elevator control.

Rudder Assembly

Rudder Control Horn

Procedure for preparing and installing the control horn for the rudder linkage.

Landing Gear Assembly

Wing Servo Assembly

Wing Servo Arm Installation

Instructions for attaching and setting up the servo arm for the wing control surfaces.

Rudder Servo Assembly

Servo Tray Installation

Procedure for installing the servo tray and mounting the rudder servo.

Switch Assembly

Switch Installation

Steps for cutting and mounting the electrical switch into the aircraft fuselage.

Engine Assembly

Engine Installation

Guide for securely mounting the engine onto the aircraft firewall.

Center of Gravity

Center of Gravity Calculation

Determining and checking the aircraft's center of gravity for safe flight.

Control Throws

First Flight Control Setup

Recommended control surface throws and settings for the initial flight.

Flight Preparation