Pilot RC Control Horn Installation
(50cc and larger have dual control horns & 30cc Aircra have a single control horn)
• Rubber/Latex Gloves.
• Epoxy (30 Minute or Stronger)
• Epoxy Mixing Cups
• Epoxy Mixing Sticks (Any mixing stick that will t into the slot)
• Denatured Alcohol or Acetone.
• Paper Towels
• Sand Paper
• X-Acto Knife
• Dremel and Small Drill Bit (Optional and Not Always Needed)
en Prepare your parts..
To Next Page
Loading...
