Pilous ARG 250 S.A.F. User Manual

INSTRUCTION MANUAL
Pilous - pasove pily, spol. s r.o., Zelezna 9
tel.: 00 420 543 25 20 10, fax: 00 420 543 25 20 11, e-mail:pilous@pilous.cz
, 619 00 Brno, Czech Republic
ARG 250 S.A.F. • ARG 250 plus S.A.F. ARG 300 S.A.F.
ARG 300 plus S.A.F. ARG 330 S.A.F. ARG 330 plus S.A.F.
•
• •

Pilous ARG 250 S.A.F. Specifications

General

Brand	Pilous
Model	ARG 250 S.A.F.
Category	Lathe
Language	English

Summary

0. In general

0.1. Safety provisions

Essential safety instructions and symbols to prevent hazards during operation.

0.2. Scope of use / use by determination

0.3. Requirements concerning operators

0.4. Requirements concerning machines - safety equipments

0.5. Protective Covers

4.3. Connection to energy supplies

5. Machine description

5.3. Band exchange, tensioning and adjustment

5.4. Guide heads - adjustment

5.5. Vice

5.5.2. Material clamping

Describes how to clamp workpieces correctly in the vice for cutting.

5.6. Control panel

5.7. Hydraulic unit

5.7.1. Vice clamping pressure setting

How to adjust the vice clamping pressure using the pressure regulation valve.

5.8. Arm uplift height setting

5.9. Regulation valve - saw band feed into cut

5.10. Cooling equipment

6.2. Band tooth selection

6.3. Workpiece clamping

6.4. Running-in the bands

6.5. Factors influencing band life

6.6. Recommended values for cutting

7. Putting into operation

7.1. Safety Control

Checks to ensure the machine is in a safe condition before operation.

7.2. First cut

Step-by-step guide for performing the initial cut on the machine.

8. Machine maintenance

8.1. Maintenance and control

Procedures for routine maintenance and inspection of machine components.

8.2. Repairs

Safety precautions and general guidance for performing repairs.

9. Errors - reasons and elimination

10. Electrical schemes

10.1. Electrical scheme ARG 250 S.A.F., ARG 250 plus S.A.F., ARG 300 S.A.F., ARG 300 plus S.A.F.

Detailed electrical wiring diagrams for specific machine models.