The screen BLADE CHANGE activates upon pressing the FAILURE - Blade-tension sensor. The failure occurs in the event of saw
blade breakage or loosening of the saw blade tensioning star nut.
BLADE CHANGE
The screen SERVICE is activated by pressing the button
SERVICE in the MAIN MENU. The display that
informs the user about the machine manufacturer and
distributor - contacts regarding the service in emergency.
The screen is locked - only the manufacturer or the distributor
can edit the data.
CONTACT
SERVICE
The screen FAILURES gets activated after pressing the button
FAILURES SCREEN in the MAIN MENU, or upon pressing the
button DATE. The latest failure always appears on top and is
not deleted. In the case of a new failure the previous failure will
move to a line below. The system stores 200 failures. You can
browse through the list using buttons.
Failures appear in color:
red - current unsolved failure
green - resolved failure stored in the system
FAILURES
Move to the next/previous line
Jump to the last/first item in the list
FAILURES
0 9 : 2 0 : 0 3 0 8 / 1 0 / 2 0 1 6
FAILURE DATE TIME
ESC
SERVICE
0 9 : 2 0 : 0 3 0 8 / 1 0 / 2 0 1 6
MANUFACTURER:
DISTRIBUTOR:
PILOUS-pásové pily spol. s r.o.
Železná 9
CZ-619 00 Brno
web:
e-mail:
tel:
www.pilous.cz
metal@pilous.cz
+420 543 25 20 10
PILOUS-pásové pily spol. s r.o.
Železná 9
CZ-619 00 Brno
web:
e-mail:
tel:
www.pilous.cz
metal@pilous.cz
+420 543 25 20 10
ESC
BLADE CHANGE
0 9 : 2 0 : 0 3 0 8 / 1 0 / 2 0 1 6
L R
AMMETER
0
15 90
BLADE SPEED
m/min
0.0 A
START
HEIGHT
mm
70
FAILURE
Blade-tension sensor
%IX0.0 BP2
To Next Page
Loading...
Need help?
General