Pilz PMI 5 Series - Connecting the Unit; Supply Voltage

Wiring
Operating Manual PMI 5
1002241-EN-07
25
6.2 Connecting the Unit
6.2.1 Supply voltage
The connection for the 24VDC supply is located on the side of the housing.
1 2 3
Fig.: Layout of supply voltage connector
} 1: Functional earth
} 2: 0 V
} 3: + 24 VDC
UL requirement: Use a 24 VDC power supply (isolating source). Connect a max. 5 A fuse
between the power supply and PMI.