17
3.3.9. How to Update Firmware
Open the Pimax Client on your PC. Navigate to "Device Settings → Check for Updates" in the client. Pimax Client; The system will check the
currently installed software and firmware version, and will prompt you to perform an update if there is a new version available on the server.
CAUTION READ CAREFULLY
When updating the device firmware, the headset must be paired with the controllers to perform the OTA update:
Before updating the firmware, please check the power of the headset and controllers. We that you only perform updates when
the power of the headset and controllers all exceed 50%
Please do not unplug the USB cable or turn off the computer when updating the device firmware;
To Next Page
Loading...
