To Next PageTo Next Page
Need help?Do you have a question about the Pioneer A-30-K/-S and is the answer not in the manual?
General| Input Sensitivity | 200 mV |
|---|---|
| Signal-to-Noise Ratio | 100 dB (IHF-A) |
| Signal-to-Noise Ratio (IHF-A) | 100 dB |
| Input Impedance | 47 k ohms |
| Speaker Impedance | 4 Ω - 16 Ω |
| Inputs | PHONO (MM), LINE |
| Outputs | RECORDER, HEADPHONES |
Explains safety symbols like lightning flash and exclamation point, along with general safety precautions.
Provides instructions and symbols for the proper collection and disposal of old electronic products and batteries.
Details the required temperature, humidity, and location factors for optimal amplifier operation.
Covers safety precautions for handling the power cord and warnings about hot surfaces during operation.
Guides users through the process of unpacking the amplifier and verifying all included accessories.
Provides step-by-step instructions for inserting batteries into the remote control correctly.
Offers advice on maximizing remote control range and avoiding interference for reliable operation.
Recommends suitable locations and surfaces for installing the amplifier to ensure proper performance.
Details how to connect various audio components, speaker systems, and power sources to the amplifier.
Explains the concept and connection method for bi-wiring speakers for enhanced audio quality.
Instructs on twisting cable cores, inserting into terminals, and ensuring correct polarity for speakers.
Guides on connecting audio sources and output devices using RCA cables, ensuring correct left/right channels.
Explains how to use centralized control functions with other compatible Pioneer audio equipment.
Details the correct procedure for plugging the unit's power cord into the AC socket and the unit.
Provides a comprehensive guide to all buttons, knobs, and indicators found on the amplifier's front panel.
Identifies and describes all input, output, and terminal connections available on the amplifier's rear panel.
Details the purpose and operation of each button on the provided remote control for managing the amplifier.
Guides users on turning on components, selecting sources, and adjusting volume for audio playback.
Explains how to put the amplifier into standby mode using the remote or front panel controls.
Details how to utilize the POWER AMP DIRECT function on the A-30 model for use as a power amplifier.
Provides instructions on how to record audio from connected sources to an external recording device.
Explains how to enable the Auto Power Down function to conserve energy when the unit is not in use.
Guides users on how to reset all amplifier settings back to their original factory defaults.
Offers solutions for frequently encountered problems, guiding users through troubleshooting steps.
Provides instructions for safely cleaning the amplifier's exterior and maintaining its appearance.
Lists comprehensive technical data, including power output, dimensions, weight, and electrical characteristics.
Includes important notes on specifications, design, and product names, along with copyright information.
