Need help?Do you have a question about the Pioneer A-207 and is the answer not in the manual?
General| Signal-to-Noise Ratio | 100 dB (Line) |
|---|---|
| Input Impedance | 47 k ohms (Line) |
| THD | 0.08% |
| Input sensitivity (Line) | 150 mV |
| Signal to noise ratio (Line) | 100 dB |
| Input Sensitivity | 150 mV (Line) |
| Dimensions | 420 x 308 x 90 mm |
| Input sensitivity (MM) | 2.8 mV |
| Speaker load impedance | 4-16 ohms |
| Frequency Response | 5Hz-100kHz (+0dB, -3dB) |
Details the output power ratings for the A-207 and A-107 models.
Instructions for proper placement and airflow to ensure optimal performance and safety.
Visual guide for connecting various audio sources and speaker systems to the amplifier.
Step-by-step guide for preparing and inserting speaker wires into terminals.
Instructions for connecting audio sources like CD players, tuners, and tape decks.
Information on using switched/unswitched AC outlets and precautions for connected equipment.
Description of main front panel controls: Power, Volume, Input Selector, Balance, and Tape Monitor.
Controls for adjusting bass, treble, loudness, and bypassing circuits for pure sound.
Buttons for selecting speaker systems (A/B) and the jack for connecting headphones.
Overview of rear panel connectors for grounding, phono, tuner, CD, line, and tape inputs/outputs.
Location and function of the voltage selector switch and AC outlets for power management.
Steps before operation, playback selection, and volume/tone adjustments.
Procedures for recording audio from sources and copying tapes between decks.
How to utilize cassette decks or adaptor components connected to TAPE 2 MONITOR terminals.
Guide to diagnosing and resolving common issues like no power, no sound, or recording problems.
Detailed technical specifications for power output, input sensitivity, frequency response, and tone controls.
Details on power requirements, consumption, AC outlet ratings, unit dimensions, and weight.
To Next Page
