How to fix a Pioneer AVH-P6350BT Car Receiver when the power will not turn on?
If your Pioneer Car Receiver's power won't turn on, first, double-check that all leads and connectors are correctly connected. If the connections are correct, the fuse may be blown. Identify and fix the cause of the blown fuse, then replace it with a fuse of the same rating.
Why is the volume level low on my Pioneer Car Receiver and how do I fix it?
If the volume level is low on your Pioneer Car Receiver, the attenuator might be on. Turn the attenuator off to restore the volume.
What to do if there is no image displayed on my Pioneer AVH-P6350BT Car Receiver?
If your Pioneer Car Receiver displays no image, it could be due to noise or other factors causing the built-in microprocessor to malfunction. Try pressing the RESET button.
Why is there no sound during still, slow motion, or frame-by-frame playback on my Pioneer AVH-P6350BT?
If there is no sound during still, slow motion, or frame-by-frame playback on your Pioneer Car Receiver: * The disc may not be compatible with your video system. Try using a compatible disc. * The cables may not be connected correctly. Ensure all cables are properly connected.
Why is playback not possible on my Pioneer AVH-P6350BT Car Receiver?
If your Pioneer Car Receiver is not playing media, consider these potential causes: * The disc may be dirty, so try cleaning it. * The disc type might not be compatible with the unit, so verify the disc type. * The file size and transmission rate could be above recommended levels; create a DivX file within the recommended specifications. * The aspect ratio may be incorrect, causing a stretched image; select the appropriate setting for your display.
What to do if the image pauses and the Pioneer AVH-P6350BT is not responding?
If you experience a pause in the image and the Pioneer Car Receiver becomes unresponsive, it may be verifying whether a disc is loaded. Stop playback and then restart it.
General| Brand | Pioneer |
|---|---|
| Model | AVH-P6350BT |
| Category | Car Receiver |
| Language | English |
Read all instructions regarding your display and retain for future reference.
Warnings and guidelines to prevent distraction and ensure safe operation while driving.
Information about the product, including laser safety and handling precautions.
Details on how to detach the front panel to deter theft and important handling notes.
Instructions on how to reset the unit to its initial settings using the reset button.
Explanation of the feature demo and how to cancel or restart it.
Instructions on adjusting touch panel response positions for accurate touch input.
Guidelines for installing the battery and using the remote control effectively.
Diagram and description of the head unit's parts and their functions.
Diagram and description of the remote control buttons and their operations.
How to turn the unit on/off and select sources using buttons and touch panel keys.
Explanation of various touch panel keys for navigation and source selection.
How to use the scroll icon and scrubber bar to view hidden items or specify playback points.
Instructions for opening, closing, and turning the LCD panel horizontally.
Procedures for ejecting discs and SD memory cards.
Guide to adjusting the unit's date and time settings.
Overview of tuner operations, including touch panel keys for tuning and band selection.
Guide to viewing video content from DVD, CD, USB, SD, and iPod sources.
Overview of TV tuner operations and related touch panel keys.
Guide to listening to audio from various sources like CD, USB, SD, and iPod.
How to view still images from CD, USB, and SD, including slideshow functionality.
Overview of Bluetooth telephone functions, including standby and call modes.
Detailed operations for Bluetooth telephone functions during and after a call.
Guide to controlling Bluetooth audio players connected to the unit.
How to store, recall, and automatically find the strongest radio/TV stations.
Switching between media file types when playing discs with mixed content.
Using the arrow keys to navigate and operate the DVD menu.
Operating the iPod through the unit, including App Mode and random play.
Setting the repeat range for discs, tracks, folders, titles, and all items.
Playing videos from a connected iPod, including switching to music mode.
Methods for browsing and searching video/music content on the iPod.
Using bookmark function for resume playback and frame-by-frame playback.
Searching for playback parts, and changing audio/subtitle languages.
Switching viewing angles and audio output modes for DVDs and Video CDs.
Operating Video CDs featuring Playback Control (PBC) and its limitations.
Selecting files from a list of names for compressed audio, DivX, and JPEG.
Enhancing audio quality with S.Rtrv and adjusting iPod audiobook playback speed.
Playing DivX VOD content and capturing images as wallpaper.
Selecting desired modes for enlarging 4:3 pictures to 16:9.
Calling numbers from the phone book and searching by alphabet.
Using missed, received, and dialed call lists, including from optional Bluetooth adapter.
Setting automatic answering, adjusting volume, and switching ring tones.
Storing and using preset phone numbers for quick dialing.
Instructions for making calls by entering phone numbers directly.
Switching to private mode to talk directly on your cellular phone during a conversation.
Procedures for pairing Bluetooth devices with the unit, including from the unit itself.
Methods for pairing Bluetooth devices and enabling automatic connection.
Managing visibility, device address, and PIN codes for Bluetooth connections.
Establishing a Bluetooth connection initiated from the cellular phone.
Registering a connected cellular phone to access full Bluetooth features.
Overview of accessing and navigating various menu functions.
Adjusting fader/balance, equalizer curves, and the 8-band graphic equalizer.
Using auto-equalizer, sonic center control, loudness, and subwoofer output.
Adjusting bass levels and using the high-pass filter for speaker output.
Adjusting volume levels for different sources to ensure consistent output.
Introduction to DSP adjustments and using the position selector for sound staging.
Setting speaker positions and adjusting fader/balance within the DSP menu.
Using SFC function to create a live performance acoustic sensation.
Controlling dynamic range and using the down-mix function for multi-channel audio.
Using direct control for audio settings and enabling Dolby Pro Logic II for surround sound.
Adjusting music mode settings within Dolby Pro Logic II.
Configuring speaker size, phase, and output levels for optimal sound.
Correcting subwoofer phase to prevent bass cancellation and improve clarity.
Making fine adjustments to speaker output levels for balanced audio.
Selecting crossover frequencies for subwoofer and speakers.
Using test tones to adjust speaker output levels and achieve overall balance.
Adjusting time alignment based on listening position and speaker distance.
Adjusting the 3-band parametric equalizer for front, rear, and center speakers.
Using auto-equalizer and auto TA/EQ for automatic sound characteristic measurement.
Setting desired subtitle, audio, and menu languages for DVD playback.
Configuring multi-angle display, aspect ratio, slideshow interval, and parental lock.
Setting and changing the parental lock code number and level.
Selecting whether to display DivX external subtitles.
Registering DivX VOD codes, setting digital output, and configuring automatic DVD playback.
Activating auxiliary input, AV input, and rear output/subwoofer controller settings.
Adjusting FM and AM tuning step increments for manual tuning.
Managing sound muting, menu language, clearing Bluetooth memory, and updating software.
Setting automatic open/close function and adjusting LCD panel slide position and angle.
Switching the warning tone and configuring rear view camera polarity and display.
Selecting video output format and adjusting video signal settings for AV input.
Selecting TV country group and understanding auto EQ measurement.
Correcting distorted sound and resetting all audio functions to default.
Customizing illumination colors, OSD color, and background display.
Registering and customizing menu columns for quick access.
Adjusting brightness, contrast, color, hue, dimmer, temperature, black level, and RGB dot.
Switching the output source for the rear monitor to various inputs or off.
Adjusting touch panel response positions using 4-point and 16-point methods.
Connecting external devices like VCRs or portable players via AUX input.
Safety warnings and guidelines for connecting the unit and its components.
Details on DIN front-mount and rear-mount installation using available parts.
Instructions on how to safely remove the unit from its mounting.
Guidance on installing the microphone on the sun visor or steering column.
Instructions for adjusting the microphone angle for optimal voice pickup.
Diagnosing and resolving common problems with power, operation, and playback.
Troubleshooting common playback errors related to discs and region numbers.
Resolving issues related to Video CDs, iPod connectivity, and Bluetooth phone calls.
Understanding and resolving error messages related to microphone, speaker, and battery.
Precautions for handling discs, USB storage devices, and iPods to prevent damage.
Information on compatible file formats for JPEG, DivX, WMA, MP3, and AAC.
Details on supported iPod models, software versions, and storage device compatibility.
Guidelines for using the display correctly and sequencing audio files.
Information on LCD screen characteristics, backlight, and keeping the display in good condition.
Information on copy protection technology, Bluetooth, DVD, and iTunes trademarks.
Information on MP3, WMA, SD memory cards, iPod, Dolby Pro Logic II, DTS, and DivX technologies.
Chart listing language codes used for DVD menus and subtitles.
Power source, grounding, maximum consumption, and dimensions.
Details on screen size, aspect ratio, pixels, display type, and color system.
Maximum power output, impedance, preout level, equalizer, HPF, and subwoofer settings.
Disc compatibility, region numbers, frequency response, and signal-to-noise ratio.
USB standard, current supply, class, file system, and media decoding formats.
Compatible physical format, file system, and MP3 decoding format for SD cards.
Frequency range, sensitivity, and signal-to-noise ratio for FM and AM tuners.
Bluetooth version and output power specifications for the unit.
Wavelength and output specifications for the infrared remote control.
To Next Page