To Next PageTo Next PageWhat to do if my Pioneer AVH-X1600DVD Car Receiver won't play a disc?
If your Pioneer Car Receiver won't play a disc, the disc might be dirty, so clean it. Another possibility is that the disc type is not supported by the unit, so check the disc type. Finally, the disc loaded might not be compatible with this video system; change the disc to one that is compatible with your video system.
What to do if there is no sound from my Pioneer AVH-X1600DVD Car Receiver?
If you are not getting any sound from your Pioneer Car Receiver, check the following: * Ensure the volume level is adequately adjusted. * Make sure the attenuator is turned off.
What to do if my Pioneer AVH-X1600DVD Car Receiver has no sound?
If there is no sound from your Pioneer Car Receiver, it could be due to incorrect cable connections, so ensure they are correctly connected. Also, sound is not possible if the unit is performing still, slow motion, or frame-by-frame playback.
How to fix a Pioneer AVH-X1600DVD Car Receiver that will not turn on?
If your Pioneer Car Receiver's power won't turn on, first, double-check all the leads and connectors to ensure they are correctly connected. If the connections are correct, the fuse might be blown. Identify what caused the fuse to blow, fix it, and then replace the fuse with one of the same rating. If those steps don't work, the built-in microprocessor might be malfunctioning due to noise or other factors. In this case, press the RESET button.
What to do if my Pioneer AVH-X1600DVD Car Receiver screen is blank and touch panel is unresponsive?
If your Pioneer Car Receiver is not displaying anything and the touch panel keys cannot be used, it could be due to the rear view camera not being connected. Connect a rear view camera to resolve this. It could also be that the Camera Polarity is at an incorrect setting. Press the home button to return to the source display and then select the correct setting for Camera Polarity.
Why is there no image on my Pioneer AVH-X1600DVD display?
If there is no image displayed on your Pioneer Car Receiver, it might be because the parking brake cable is not connected, or the parking brake is not applied. Connect the parking brake cable and apply the parking brake.
How to enable subfolder playback on Pioneer Car Receiver?
If subfolders cannot be played back on your Pioneer Car Receiver, folder repeat play might be selected. Select the repeat range again.
How to increase the volume on my Pioneer AVH-X1600DVD Car Receiver?
If there is no sound or the volume level is low on your Pioneer Car Receiver, first, adjust the volume level. Also, check if the attenuator is on and turn it off.
What to do if the image displayed stops on Pioneer Car Receiver?
If the image displayed on your Pioneer Car Receiver stops (pauses) and the unit cannot be operated, it may be because the data could no longer be read during playback. Stop playback once, and start playback again.
What to do if playback is not possible on Pioneer AVH-X1600DVD?
If playback is not possible on your Pioneer Car Receiver, it could be due to several reasons. First, clean the disc if it is dirty. Second, verify that the disc type is supported by the unit. Lastly, ensure the disc is compatible with your video system.
General| MP3 playback | Yes |
|---|---|
| CD-R playback | - |
| Audio formats supported | AAC, MP3, WMA |
| Video formats supported | DIVX, MPEG1, MPEG2, MPEG4, XVID |
| Supported radio bands | AM, FM |
| Preset stations quantity | 24 |
| Output power | 200 W |
| Product color | Black |
| Disc types supported | CD, DVD |
| Equalizer bands quantity | 8 |
| Analog signal format system | NTSC, PAL, SECAM |
| Aspect ratio | 16:9 |
| Display diagonal | 6.1 \ |
| Number of OSD languages | 9 |
| On Screen Display (OSD) languages | DEU, DUT, ENG, ESP, FRE, ITA, POR, RUS, TUR |
| Video in | 2 |
| Bluetooth | No |
| USB version | 2.0 |
| Line outputs (RCA) | 3 |
| USB ports quantity | 1 |
| Cables included | USB |
