Open the black connector and
slide the cables out
Insert the pink cable pin (speedpulse)
to the open position twenty-two (22)
Connect the main harness
Make sure to use the GREY connector
!Use top plug for steering wheel controls
(W/R)!
DO NOT USE THE ORANGE CONNECTOR
See the warning label on the interface
Connect battery and accessory power to the
main harness of the unit
Put the cable for the rotary commander
through the side opening of the panel
Pioneer installation manual - Fiat Ducato 8 - v1.03
! Steps 25 & 26 are only for AVIC-Z1000D12-C & AVIC-Z1000D11-CHU kits !
! Step 27 is only for AVIC-Z100016-C !
To Next Page
Loading...
