EasyManua.ls Logo

Pioneer AVIC-X930BT - User Manual

Pioneer AVIC-X930BT
445 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operation Manual
MULTIMEDIA AV NAVIGATION RECEIVER
AVIC-Z130BT
AVIC-X930BT
AVIC-X9310BT
Notice to all users:
This software requires that the navigation system is
properly connected to your vehicles parking brake and
depending on your vehicle, additional installation may
be required. For more information, please contact your
Authorized Pioneer Electronics retailer or call us at
(800) 421-1404.
Be sure to read Important Information for the User
first!
Important Information for the User includes the
important information that you must understand before
using this navigation system.
English

Table of Contents

Other manuals for Pioneer AVIC-X930BT

Questions and Answers

  • J
    Jay LeeJul 26, 2025
    Why Pioneer Receiver cannot position my vehicle on the map accurately?
    • S
      Susan HessJul 26, 2025
      If you cannot position your vehicle on the map without a significant positioning error, it might be due to several reasons: * The GPS antenna could be in an unsuitable location. Check the GPS signal reception and the position of the GPS antenna if necessary. * Obstacles might be blocking signals from the satellites. Check the GPS signal reception and the position of the GPS antenna if necessary, or continue driving until reception improves. Ensure you keep the antenna clean. * The position of satellites relative to your vehicle might be inadequate. In this case, continue driving until reception improves.
  • M
    Mary SmithAug 2, 2025
    What to do if GPS signal quality is poor on Pioneer Receiver?
    • J
      Jeanette CastanedaAug 2, 2025
      If the quality of signals from the GPS satellites is poor, resulting in reduced positioning accuracy, it could be due to: * Signals from the GPS satellites having been modified to reduce accuracy. In this case, wait until reception improves. * Interference from a vehicle phone or cellular phone used near the GPS antenna. When using a cellular phone, keep its antenna away from the GPS antenna.
  • C
    Casey ClaytonAug 10, 2025
    What to do if leads and connectors are incorrectly connected in Pioneer Receiver?
    • M
      Margaret TaylorAug 10, 2025
      If leads and connectors are incorrectly connected, confirm once more that all connections are correct.
  • S
    Shannon GibbsAug 18, 2025
    What to do if noise causes Pioneer Receiver microprocessor to operate incorrectly?
    • X
      Xavier RodriguezAug 18, 2025
      If noise and other factors are causing the built-in microprocessor to operate incorrectly, park your vehicle in a safe place, and turn off the engine. Turn the ignition key back to off (ACC OFF). Then start the engine again, and turn the power to the navigation system back on.

Pioneer AVIC-X930BT Specifications

General IconGeneral
Screen Size6.1 inches
Resolution800 x 480 pixels
TouchscreenYes
NavigationYes
BluetoothYes
USB InputYes
SD Card SlotYes
Preamp Outputs3 pairs (front, rear, subwoofer)
RMS Power14 watts
Peak Power50 watts x 4 channels
iPod/iPhone ControlYes
DVD PlayerYes
Rear View Camera InputYes
AUX InputYes
HD RadioNo
CD PlaybackYes
MP3 PlaybackYes
WMA PlaybackYes
AAC PlaybackYes
iPhone CompatibilityYes
Steering Wheel Control CompatibleYes
Satellite Radio ReadyYes

Related product manuals