Why Pioneer Blu-ray Player power turns off automatically?
If your Pioneer Blu-ray Player is turning off automatically, check if the “Auto Power Off” setting is set to “Yes”. When this setting is enabled, the power will automatically turn off after 10 minutes of inactivity (no playback).
What to do if Pioneer BDP-330 Blu-ray Player remote control does not work?
If the remote control for your Pioneer Blu-ray Player isn't working, try these steps: * Make sure you are within 23 feet of the remote control sensor. * Replace the batteries in the remote.
Power Requirements| power requirements | 120 V 60 Hz |
|---|
Weight and Dimensions| product weight | 5 lbs. 8 oz. |
|---|---|
| dimensions | 16.54” x 2.94” x 26.77” |
Information on preventing electric shock, high voltage, and proper handling of power cords.
Warnings about water, ventilation, placement, and fire hazards from the equipment.
Details regarding the product's classification as a Class 1 laser product.
Using functions like fast forward, rewind, skip, pause, slow playback, and repeat.
Configuring network settings, IP addresses, and connection types.
Procedures for updating player software and managing USB memory devices.
Solutions for common problems related to power, remote control, and player operation.
Troubleshooting for playback errors, picture issues, and sound problems with discs.
Solutions for connectivity problems and HDMI control function errors.
How to reset the player and interpret common error messages related to discs and USB.
To Next Page
