To Next PageTo Next Page
Need help?Do you have a question about the Pioneer CT-7R and is the answer not in the manual?
Provides the main schematic diagram for the signal and control circuits.
Procedure for adjusting the pinch roller pressure using a tension gauge.
Steps for performing preliminary adjustment of the head azimuth.
Guide for adjusting tape travel to prevent curling on heads and guides.
Procedure to adjust FF/REW rotational speed using a frequency counter.
Instructions for adjusting winding torque during playback mode.
Method to check fast forward and rewind torque using a meter.
Procedure for checking supply reel back-tension torque during playback.
Details how to adjust recording level for different tape types and Dolby NR.
Provides the main schematic diagram for the signal and control circuits.
Procedure for adjusting the pinch roller pressure using a tension gauge.
Steps for performing preliminary adjustment of the head azimuth.
Guide for adjusting tape travel to prevent curling on heads and guides.
Procedure to adjust FF/REW rotational speed using a frequency counter.
Instructions for adjusting winding torque during playback mode.
Method to check fast forward and rewind torque using a meter.
Procedure for checking supply reel back-tension torque during playback.
Details how to adjust recording level for different tape types and Dolby NR.
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Heads | 1 x record/playback, 1 x erase |
| Tape Type | Type I, CrO2, Metal |
| Frequency Response | 20Hz to 19kHz (Metal tape) |
| Total Harmonic Distortion | 0.8% |
| Type | Cassette Deck |
| Inputs | Line In |
| Outputs | Line Out |
