Pioneer CT-S830S Service Manual

Y) PIONEER’
The Art of Entertainment
Service
Manual —
The chapter 1 of this Service Manual will not be reprinted. On your additional orders, we may supply only the
chapter 2. For the chapter 1, please make copies and attach to the chapter 2 at your side if necessary.
STEREO CASSETTE DECK
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
| Model The voltage can be converted by the
Type Power Requirement :
CT-S830S._ |CT-S830S-G following method.
* : Alter the wiring of the Power-supply block at the primary winding of power transformer referring to the “Line Voltage Selection” described
in Service Manual.
CONTENTS
CHAPTER1
CHAPTER2
1.1
SPECIFICATIONS
covseccersssecceessceseenseseceeeetseeeees
1-2
2.1
BLOCK
DIAGRAM
«erccscsteecccecsccscseccsercnescsaanens
2-2
4.2
PANEL
FACILITIES
--++1scceseeseeeeerccneseseeeeeeeseseres
1-3
2.2
EXPLODED
VIEWS
AND
PACKING
«---eesceeceeseee
2-3
1.3
FLINFORMATION
-occcsccecceeescescecececsecereseeeetesees
1-4
2.3
SCHEMATIC
DIAGRAMS
oerrreveseeerceceeseeeceeen
ences
2-9
1,4
ADJUSTMENTS
-+scccccccscessssecsscceeseeseseveversrereese
15
2.4
PCB
CONNECTION
DIAGRAM
«+ssececccseecseceesecs
9-15
1.5 PARTS LIST FOR EXPLODED VIEWS AND :
PACKING | c28esties sxc eness ccvesescsvevesctcdecsestecsensedveds 1-9
1.6 PCB PARTS LIST -ccessecceccsssceeecscecceassececeeneeees 1-12
PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153, Japan
PIONEER ELECTRONICS SERVICE INC. P.O. Box 1760, Long Beach, California 90801 U.S.A.
PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway Markham, Ontario L9R OP2 Canada
PIONEER ELECTRONIC [EUROPE] N.V. Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium
PIONEER
ELECTRONICS
AUSTRALIA
PTY.
LTD.
178-184
Boundary
Road,
Braeside,
Victoria
3195,
Australia
TEL:
[03]
580-9911
© PIONEER ELECTRONIC CORPORATION 1994 T—SSK APR. 1994 Printed in Japan

Pioneer CT-S830S Specifications

General

Track System	4-track, 2-channel stereo
Tape Speed	4.8 cm/s
Total Harmonic Distortion	0.8%
Type	Cassette Deck
Heads	1 x playback, 1 x record/playback
Motor	1 x capstan, 1 x reel
Tape Type	Type I (Normal), Type II (CrO2), Type IV (Metal)
Frequency Response	20Hz to 21kHz (Metal tape)
Inputs	Line in
Outputs	Line out

Summary

CHAPTER 1

1.1 SPECIFICATIONS

Detailed technical specifications for the audio device, covering performance metrics, power, and connectivity.

1.2 PANEL FACILITIES

Description of the front panel controls, buttons, and indicators of the audio device.

1.3 FL INFORMATION

Pin connection and grid assignment details for the FL display unit.

1.4 ADJUSTMENTS

Procedures for mechanical and electrical adjustments of the audio device, including tape speed and bias settings.

1.5 PARTS LIST FOR EXPLODED VIEWS AND PACKING

Comprehensive list of parts for exploded views and packing, categorized by model and part number.

1.6 PCB PARTS LIST

List of components for Printed Circuit Boards (PCBs) used in the audio device, including semiconductors and assemblies.

CHAPTER 2

2.1 BLOCK DIAGRAM

Functional block diagram illustrating the signal flow and main circuit blocks of the audio device.

2.2 EXPLODED VIEWS AND PACKING

Exploded views of the audio device, detailing parts and their assembly for packing purposes.

2.3 SCHEMATIC DIAGRAMS

Detailed schematic diagrams for various units of the audio device, showing circuit connections and component values.

2.4 PCB CONNECTION DIAGRAM

Diagrams showing PCB layout and connections between different units of the audio device.