Pioneer CU-SA004 - Page 4

REMOTE CONTROL OF CASSETTE DECK
kd Set the TRANSMIT
co mode selector to
*FUNCTION key:
Switches amp input function.
DECK Il key:
Switches to the DECK II func-
tions when using a double cas-
sette deck.
Coc (REC) key:
Selects the recording mode.
Two keys must be pressed at
the same time.
i (PAUSE) key:
Temporarily interrupts recording
or playback. Press again to
resume.
~<#4 (FF) key:
Fast forwards the tape in the
direction of the arrows.
<] (PLAY) key:
Starts reverse playback.
@ (STOP) key:
Stops the tape.
[> (PLAY) key:
Starts forward playback.
> (FF) key:
Fast forwards the tape in the
direction of the arrows.
NOTE:
¢ Keys marked with ’*” have
the same function in both the
AUDIO and VIDEO positions.
e The TAPE I/ll selector switch
on tape decks so equipped
cannot be used to control
TAPE I. Use the selector
switch on the deck itself.
(ff you set the switch on this
deck to TAPE |, you can con-
trol it with the TAPE Il keys on
the remote control unit.)
e The <j key can only be used
with tape decks capable of
reverse play.
© Some keys will not work with
all types of tape deck. Refer
to the operating instructions
for more information.
4
<ARD1005>
DECK I key:
Switches to the DECK | func-
tions when using a double cas-
sette deck.
44 (FF) key:
Fast forwards the tape in the
direction of the arrows.
<1 (PLAY) key:
Starts reverse playback.
@ (STOP) key:
Stops the tape.
[> (PLAY) key:
Starts forward playback.
pr (FF) key:
Fast forwards the tape in the
direction of the arrows.
@® PIONEER’
QO tRaNswitLeaan
SR USE
RECALL@@SLEARN
PROGRAM oisc. CO/VOP
CHR/FR-TM iSEARCH
VOP PGM OISPLAY
PROGRAMMABLE
REMOTE CONTROL UNIT
™M-CLR RESET Gu-saces