Why does my Pioneer DEH-X1650UB Receiver show 'AMP ERROR'?
The 'AMP ERROR' message on your Pioneer Receiver indicates that the protective circuit has been activated because of an incorrect speaker connection. Check the speaker connections. If the message persists after restarting the device, seek assistance from your dealer or an authorized Pioneer Service Station.
What to do if my Pioneer DEH-X1650UB says 'FORMAT READ'?
If your Pioneer Receiver displays 'FORMAT READ', replace the USB storage device.
General| DIN Size | Single DIN |
|---|---|
| Channels | 4 |
| Max Power Output | 50 W x 4 |
| RMS Power Output | 22 W x 4 |
| Tuner | AM/FM |
| USB Port | Yes |
| Bluetooth | No |
| CD Playback | Yes |
| AUX Input | Yes |
| Display Type | LCD |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | Yes |
| ID3 Tag Display | Yes |
| Detachable Face | Yes |
| High-Pass Filter | Yes |
| Low-Pass Filter | Yes |
Guidance on what to do if the unit fails to work properly.
Guide to adjusting Fader, Balance, EQ, and Loudness settings.
Essential steps for operating the unit, including turning on/off and selecting sources.
Instructions for playing discs and USB storage devices.
Detailed wiring instructions and warnings for connecting the unit.
Steps for installing the unit into the dashboard using the front-mount method.
Instructions for connecting the power cord for standard and subwoofer setups.
Determining the correct position and securing the unit for rear-mount installation.
Common symptoms, causes, and actions for resolving unit issues.
Guidance for interpreting and responding to various error messages.
To Next Page