To Next PageTo Next Page
Need help?Do you have a question about the Pioneer DVR-RT500-S and is the answer not in the manual?
General| Type | DVD Recorder |
|---|---|
| Video System | NTSC |
| Progressive Scan | Yes |
| Remote Control | Yes |
| Hard Drive | No |
| USB Port | No |
| Weight | 9.9 lbs |
| Recordable Media | DVD-R, DVD-RW |
| Playback Formats | DVD-Video, DVD-R, DVD-RW, DVD+R, DVD+RW, CD, CD-R, CD-RW |
| Tuner | NTSC |
| Inputs | Composite, S-Video, Component |
| Outputs | Composite, S-Video, Component |
Essential safety precautions for USA models, including leakage current checks.
Notice regarding special safety characteristics of electrical and mechanical parts.
Details on maximum output power and wavelength for laser diodes.
Information on laser warnings, label checks, and additional laser cautions.
Guidelines for product safety, correct repair methods, and safe servicing environment.
Procedures for product adjustments and cleaning of critical parts.
Guidelines for lubricants, adhesives, and shipping preparation.
Overview of the product and detailed specifications for the DVD system.
Detailed specifications related to the VCR system.
Exploded views and parts for packing and exterior sections.
Exploded views and parts for the top and bottom deck assemblies.
Diagram illustrating the wiring cables and connections.
Detailed block diagrams illustrating system functionality, including power, control, and signal paths.
Comprehensive diagram showing all internal wiring connections between major components.
Layout diagrams showing component placement on the DVD/HD MPEG PCB.
Layout diagrams showing component placement on the VCR MT PCB.
Layout diagram illustrating component placement on the Power PCB.
Layout diagram illustrating component placement on the Operation PCB.
Oscilloscope waveforms for the DVD/HD MPEG PCB.
Oscilloscope waveforms for the VCR MT PCB.
Oscilloscope waveforms for the Power PCB.
Connection diagram for the DVD/HD MPEG PCB.
Connection diagram for the VCR MT PCB.
Connection diagram for the Power PCB.
Connection diagram for the Operation PCB.
List of necessary servicing tools and preparatory steps before adjustments.
Overview of adjustment items, points, and service mode entry.
Detailed procedures for mechanical adjustments of the tape transport mechanism.
Detailed procedures for electrical adjustments, like PG shifter and head alignment.
Steps for replacing the DVD loader and EEPROM IC, including region and shipping settings.
Step-by-step guide for safely disassembling the unit's mechanical and PCB components.
Critical cautions and best practices for safe disassembly and reassembly.
Procedures for updating DVD firmware and measuring disc error rates.
Understanding the power-on sequence and methods for disc/tape handling.
Instructions for parental control, tray lock, and disc formatting options.
Detailed disassembly steps and important cautions for safe servicing.
Guidelines for cleaning components and a key to technical abbreviations.
Identification of controls and connectors on the front and rear panels.
Explanation of symbols and messages shown on the display window.
Detailed description of all functions of the remote control.
