Introduction to advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3 Turn MULTI-CONTROL to select the
function.
PLAY MODE (repeat play)—RANDOM MODE
(random play)—SCAN MODE (scan play)—
PAUSE (pause)—SOUND RETRIEVER (sound
retriever)
Function and operation
PLAY MODE, RANDOM MODE,
SCAN MODE, PAUSE and
SOUND RETRIEVER operations are basically
the same as that of the built-in CD player.
Function name Operation
PLAY MODE
Refer to Selecting a repeat play
range on page 19.
However, the repeat play
ranges you can select are dif-
ferent from that of the built-in
CD player. The repeat play
ranges of the USB portable
audio player/USB memory are:
! TRACK REPEAT – Repeat
just the current file
! FOLDER REPEAT – Repeat
the current folder
! ALL REPEAT – Repeat all
files
RANDOM MODE
Refer to Playing tracks in ran-
dom order on page 19.
SCAN MODE
Refer to Scanning folders and
tracks on page 19.
PAUSE
Refer to Pausing playback on
page 19.
SOUND RETRIEVER
Refer to Using Sound Retriever
on page 19.
Notes
! You can also select the function by pressing
FUNCTION on the remote control.
! To return to the ordinary display, press BAND.
! If you select another folder during repeat play,
the repeat play range changes to
ALL REPEAT.
! If you perform track search or fast forward/re-
verse during TRACK REPEAT, the repeat play
range changes to FOLDER REPEAT.
! When FOLDER REPEAT is selected, it is not
possible to play back a subfolder of that folder.
! After file or folder scanning is finished, nor-
mal playback of the files begins again.
Operating this unit
En
22
Section
02
To Next Page
Loading...
Need help?
General
