- 38 -
ILLUMINATION settings
Menu Item Description
COLOR (Only for FH-S720BS/S722BS/MVH-S620BS/S622BS)
[KEY COLOR], [DISP COLOR],
[BOTH COLOR]
Select color for the keys/display of the unit from 12
preset colors, [SCAN] or [CUSTOM]*.
• [SCAN]: Cycle through a variety of colors
automatically.
• [CUSTOM]*:
1 Press and hold the M.C. dial until the color
setting display appears.
2 Set the primary color (R (red)/G (green)/B
(blue)) and brightness level ([0] to [60]).
You cannot select a level below 10 for all three
of R (red), G (green), B (blue) at the same time.
You can also customize the preset colors. Select
one of the preset colors, then press and hold the
M.C. dial until the color setting display appears.
* The CUSTOM setting is only available for [KEY
COLOR] and [DISP COLOR].
DIM SETTING
[SYNC ILLUMI]*, [SYNC CLOCK],
[MANUAL]
* Only for FH-S720BS/S722BS/MVH-
S620BS/S622BS
Select the way to change the display brightness.
BRIGHTNESS (Only for FH-S720BS/S722BS/MVH-S620BS/S622BS)
[KEY], [DISP] Select the brightness for the keys/display of the
unit from [1] to [10].
The available setting ranges differ depending on
[DIM SETTING].
BRIGHTNESS (Only for FH-S520BT/S52BT/MVH-S420BT)
[1] to [10] Change the display brightness.
The available setting ranges differ depending on
[DIM SETTING].
To Next Page
Loading...
Need help?
General
