Need help?Do you have a question about the Pioneer GM-2200 and is the answer not in the manual?
Power| current consumption | 13 A |
|---|---|
| maximum power output | 130 W x 2/320 W x 1 (EIAJ) |
| continuous power output | 65 W x 2/160 W x 1 (at 4Q, 20 - 20, 000 Hz, 0.05% THD) |
Audio Performance| frequency response | 10 - 50, 000 Hz (+0 dB, -1 dB) |
|---|---|
| signal-to-noise ratio | 103 dB (IEC - A network) |
| distortion | 0.003% (at 20 W, 1 kHz) |
Weight and Dimensions| weight | 4.3 kg |
|---|---|
| dimensions | 264 (W) x 58 (H) x 260 (D) mm |
| load impedance | 4Q (2 - 8Q allowable) |
Power| current consumption | 6.5 A |
|---|---|
| maximum power output | 70 W x 2/160 W x 1 (EIAJ) |
| continuous power output | 35 W x 2/80 W x 1 (at 4Q, 20 - 20, 000 Hz, 0.05% THD) |
Audio Performance| frequency response | 10 - 50, 000 Hz (+0 dB, -1 dB) |
|---|---|
| signal-to-noise ratio | 102 dB (IEC - A network) |
| distortion | 0.003% (at 10 W, 1 kHz) |
Weight and Dimensions| weight | 2.9 kg |
|---|---|
| load impedance | 4Q (2 - 8Q allowable) |
| separation | 65 dB (1 kHz) |
Procedures for connecting the amplifier safely, avoiding short circuits and fire hazards.
Guidelines for securely mounting the amplifier to prevent injuries or accidents.
Safety precautions regarding the amplifier's operating temperature to prevent burns.
Explains the function of the power indicator light on the amplifier.
Details how to adjust input level controls for different audio sources.
How to set the drive mode switch based on speaker impedance or channel configuration.
Adjusting the BFC switch to reduce AM radio interference.
Routing the red battery lead from the engine to the passenger compartment for connection.
Instructions for connecting speaker leads to the amplifier's output terminals.
Specific wiring for stereo speaker output configuration.
Specific wiring for mono speaker output configuration.
Step-by-step guide for connecting all necessary leads securely.
Wiring diagram for connecting the amplifier to a stereo with RCA jacks.
Wiring diagram for connecting the amplifier to a stereo with DIN sockets.
Wiring diagram for connecting the amplifier to a stereo with RCA jacks.
Wiring diagram for connecting the amplifier to a stereo with DIN sockets.
Illustrates various suitable locations for mounting the amplifier in a vehicle.
To Next Page
