Why am I unable to produce loop playback by pressing the OUT/ ADJUST button on my Pioneer DJ equipment?
Loop playback requires a defined cueing point (starting point). Specify the desired cueing point. (P. 38)
What to do if my Pioneer MEP-7000 DJ Equipment USB storage device is not detected?
If your USB storage device isn't being detected, it might not comply with the USB mass storage class. Try using a compatible device. Some portable audio players and flash card readers might not be supported. Also, avoid using USB hubs, as some may not operate properly. Connect the storage device directly to the USB port. Ensure you're using FAT, FAT32, or HFS+ formats.
What to do if my Pioneer MEP-7000 sound is distorted or full of noise?
If the sound is distorted or noisy, ensure the audio cable is properly connected to the line input jack of your DJ mixer, not the microphone jack. Clean any dust or dirt from the jacks and plugs. Also, try moving the player away from any nearby television sets or turning them off, as they can cause interference.
What to do if a disc fails to eject from my Pioneer MEP-7000?
If a disc won't eject, first make sure the power cord is plugged in. If it is, ensure that the player is in pause or cue standby mode before pressing the eject button. If the eject button is broken, see P. 24.
What to do if my Pioneer MEP-7000 playback comes to a halt almost immediately after it begins?
If playback stops shortly after starting, check if the disc is inserted upside down. Reinsert it with the label side facing upward. Also, inspect the disc for dirt or condensation and wipe it clean if necessary.
Why does character data for MP3, AAC format tracks appear garbled on my Pioneer MEP-7000 DJ Equipment?
If character data appears garbled, the LANGUAGE setting may be incorrect. Go to the UTILITY screen and set LANGUAGE to the appropriate language. The track information for the music file created in the DJ software might be in a language not supported by this unit. Input the file information in a supported language, such as European languages, Russian, simplified Chinese, or Japanese. The track information for this unit might be in a language not supported by the DJ software. Check the instruction manual for the software you are using.
Why can’t I record tracks located on a USB storage device on a playlist with my Pioneer DJ equipment?
If you can't record tracks, it may be due to insufficient space on the USB storage device. Delete unnecessary files to create more space.
Why is keyboard input incorrect on my Pioneer DJ equipment?
If keyboard input is incorrect, the KEYBOARD LANGUAGE setting might be wrong. Use the UTILITY screen’s KEYBOARD LANGUAGE setting to select the proper input language. Also, ensure you are using a keyboard for one of the supported languages.
Why does back cueing fail to work when pressing the CUE button during playback on my Pioneer MEP-7000?
Back cueing won't work if no cueing point has been defined. Specify the desired cueing point. (P. 38)
Why does track searching fail to halt with Auto Cue function turned on in my Pioneer MEP-7000 DJ Equipment?
Track searching may take longer if there are long silent portions between tracks. If a search cannot be performed within 10 seconds, the track's start is set as the cue point. Hold the TIME/A.CUE button for one second or more to set the Auto Cue mode to OFF.
General| Frequency range | 4 - 20000 Hz |
|---|---|
| Channels quantity | - channels |
| Digital sound processing | - bit |
| Total Harmonic Distortion (THD) | 0.006 % |
| Dimensions (WxDxH) | 483 x 325 x 91 mm |
| Power consumption (typical) | 33 W |
Weight and Dimensions| Weight | 6100 g |
|---|
To Next Page
