To Next PageTo Next Page
Need help?Do you have a question about the Pioneer PD-50AE and is the answer not in the manual?
Analog Audio Output| RCA OUT Rated Output Level | 2.3 Vrms (1 kHz, 0 dB) |
|---|---|
| RCA OUT Impedance | 100 Ω |
Frequency and Noise| Frequency Response for CD | 2 Hz - 20 kHz |
|---|---|
| Frequency Response for SACD | 2 Hz - 50 kHz (-3 dB) |
| Signal to Noise Ratio for CD | 116 dB or more (A-weighting) |
| Signal to Noise Ratio for SACD | 116 dB or more (A-weighting) |
| THD+N for CD | 0.002 % or less |
| THD+N for SACD | 0.002 % or less |
Digital Audio Output| Coaxial Digital Output Voltage | 0.5 Vp-p |
|---|---|
| Coaxial Digital Output Impedance | 75 Ω |
| Optical Digital Output Power | -14 - -21 dBm |
| Optical Digital Output Wavelength | 660 nm |
General| Power Supply | AC 220 - 230 V, 50/60 Hz |
|---|---|
| Power Consumption | 43 W |
| Power Consumption in Standby | 0.3 W |
| Dimensions | 435 mm 138 mm 413 mm |
| Weight | 13.1 kg |
General advice for installation and operation to prevent hazards.
Guidance on recycling electronic waste and batteries according to regulations.
How to connect the unit to an amplifier using an analog audio cable.
Instructions for connecting the removable power cord to the unit and outlet.
How to turn on the unit using the main power button.
Procedure for playing standard music CDs.
Procedure for playing discs containing music files.
How to select the "USB DAC" source for digital audio conversion.
Steps to connect a computer using a USB cable.
Information on starting playback and supported OS for PC connection.
How to activate DIRECT mode to bypass sound processing for purer audio.
How to select one of three digital filter types to alter sound characteristics.
How to increase sampling frequency for enhanced sound clarity.
How to adjust lock range to reduce noise, with potential impact on sound.
Configure automatic standby mode after inactivity.
Set the unit to automatically play discs upon power-on.
Settings for digital audio output, including turning it ON or OFF.
Select the type of DIGITAL FILTER for sound processing.
Enhance sound reproduction clarity by increasing sampling frequency.
Adjust lock range to minimize incidental sounds.
Option to shorten CD loading time, potentially causing sound skipping.
Basic steps to resolve unstable operation before detailed troubleshooting.
Procedure to restore factory default settings for the unit.
Issues related to turning the unit on or it turning off unexpectedly.
Reasons and checks for discs that cannot be played.
Troubleshooting sound interruptions and lack of digital sound.
Solutions for issues playing audio from a connected computer.
Checks and troubleshooting for the remote controller.
Lists the types of discs compatible with the unit.
Information on MQA technology and playback of MQA audio files and streams.
Lists disc formats that are not supported by the unit.
Instructions on how to clean the player's exterior and disc tray.
Steps to take before moving the unit to prevent damage.
