Pioneer PD-7300 User Manual

CD player with 5Fs digital filter and glitch-less true 18-bit direct linear conversion.

Tracks can be played by their corresponding track number.

Digital level controller allows more convenient tape-editing features.

Allows for a pleasant operating feeling and a quick access.

Placing and using the compact disc player for long periods on heat-generating sources will affect its performance.

Confirm all supplied accessories are present and install remote control batteries.

Diagram identifying controls and indicators on the front panel.

Step-by-step guide for inserting a disc into the player.

How to carry out normal playback of a disc.

Playback starts from the selected track and continues to the last track.

Press the STOP key or the OPEN/CLOSE key to stop playback.

Selecting repeat modes for single track or all tracks.

Use to search for a desired track (track search operations).

Fast forward and reverse search operations.

Play tracks selected at random from the disc set.

Tracks on a disc can be programmed to play in the desired sequence.

Program entry is possible during stop mode, playback, or programmed playback.

Change to programmer playback during programmed playback.

Program tracks to be played back within a specified time period.

Length of fade-in and fade-out can be individually set between 0-9 seconds.

Insert fade-in and fade-out sound at the desired track.

Playback will continue for the specified time and end automatically with a fade-out.

Programmed playback for a specified time period.

Specify the desired sections (music windows) for continuous playback.

Press the PLAY key to start playback.

Frequency response, signal-to-noise ratio, dynamic range, and channel separation.

List of all playback and editing functions available on the player.