Pioneer PD-202 User Manual

Operating
Instructions
PD-202
PD-202
PD-102
alist
3 DIGITAL AUDIO
PD-702
® Demo mode allows you to see variation of the display. To
enter the demo mode, press POWER and then Ke <<
within 1 second without inserting the disc.
/
@ Toexit the demo mode, press one of any buttons on the
front panel.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you
will know how to operate your model properly. After you
have finished reading the instructions, put them away in a
safe place for future reference.
{n some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown
in the explanatory drawings.
However, the method of
connecting and operating the unit is the same.
WARNING: to PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMIPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed
warranty card and keep it in a secure area. This is for your
security.
{For Canadian model with the polarized plug]
CAUTION: To PREVENT ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
[Pour le modéle canadien avec la fiche polarisée]
ATTENTION: pour PREVENIR LES CHOCS ELECTRIQUES
NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE
SORTIE DE COURANT, SAUF Si LES LAMES PEUVENT ETRE
INSEREES A FOND SANS. EN LAISSER AUCUNE PARTIE A
DECOUVERT.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with this switch.
U.S., Canadian, European, U.K., Australian and Singapore
models are not provided with this switch.
Mains voltages in Saudi Arabia are 127V and 220V only.
The line voltage selector switch is located on the rear panel of this
player. Before your player is shipped from the factory, the switch is
set to the power requirements of the player stination. Check that
itis set properly before plugging the power cord into the outlet. tf the
voltage is not properly set or if you move to an area where the voltage
requirements differ, adjust the selector switch as follows:
e@ Use a medium-sized {flat blade) screwdriver. Insert the tip of the
screwdriver into the groove of the selector switch and turn it so
that the power voltage marking of your area points to the arrow.
(’ Sy
(¥)
220 -24a0v 10-127
CAUTION: Be sure to use the shielded cables wh
connecting this equipment to other devices
*This product complies with the Radio Interference require
ments of the EC (European Community} Directive 87/308/EEC.”
Y
PIONEER’
The Art of Entertainment

Pioneer PD-202 Specifications

General

Disc format	CD
Channels	2 (stereo)
Frequency response	2 Hz to 20 kHz
Dynamic range	96 dB
Line output	2V
Digital outputs	Coaxial, Optical

Summary

Demo Mode and Important Notices

Important Notices and Warnings

Provides crucial notices including fire/shock hazard warnings and specific advice for U.S./Canadian models.

Safety Precautions and Guidelines

Electrical Hazard Warnings

Details electrical safety symbols, wire color codes, and plug suitability for preventing shock.

Installation and Operation Safety

Covers safe installation locations, ventilation, heat, power sources, cord protection, and cleaning.

Grounding and Antenna Safety

Product Safety and User Guidance

Laser Safety Precautions

Warns against removing covers or accessing the laser diode mechanism for safety.

Interference and FCC Compliance

Discusses FCC compliance and methods to correct radio frequency interference.

Hearing Protection and Safe Listening

Advises on listening at safe levels to prevent hearing damage and provides a decibel level chart.

Power Cord Safety and Handling

Instructs on safe handling of the power cord to prevent electric shock or short circuits.

Connecting Components and Timer Playback

Audio Output Connections

Guides on connecting the player's audio output jacks to an amplifier.

Power Cord Connection

Initial Setup and Parts Identification

Front Panel Controls Overview

Identifies and describes the functions of all buttons and indicators on the player's front panel.

Basic CD Player Operations

Remote Control Unit Functions

Basic Playback Controls

Explains how to turn the player on/off, load discs, start, pause, and stop playback.

Troubleshooting and Specifications

Troubleshooting Common Issues

Lists common symptoms, their causes, and recommended remedies for player malfunctions.