Pioneer PD-202 - Basic CD Player Operations; Remote Control Unit Functions; Basic Playback Controls

NAMES AND FUNCTIONS OF PARTS
PD-202 oniy
®
oH
eo
1
J?)
ah PAUSE:
POWER
STANDSY/ON
a
(PD-202) /)
[|
ei
Operations indicated by the i 0 ] mark are performed with
the remote control unit. (PD-202 only)
1 Press POWER to turn on the power to the player.
2 Press OPEN/CLOSE and load a disc.
® Place the disc with the label surface facing UP.
3 Press > to start playback.
To pause playback temporarily:
Press il. The iindicator lights and playback is paused at that point.
Pressing i again or B resumes playback from the position where
pause mode was entered.
To stop playback:
Press m.
To stop playback and take out the disc:
Press OPEN/CLOSE and remove the disc. Press OPEN/CLOSE
again to close the disc tray and then press POWER to turn off the
power
To turn off the display
DssP OFF
Press DISPLAY OFF. All the indicators other than DISP OFF go off.
The display circuit which may interfere the sound quality does not
function.
OPEN / CLOSE
REMOTE CONTROL UNIT (PD-202 only)
Remote control buttons with the same names or marks as buttons
on the front panel of the player control the same operations as the
corresponding front pane! buttons.
) POWER button
HI-LITE SCAN button
RANDOM PLAY button
PAUSE button (11)
STOP button |B)
OUTPUT LEVEL buttons (-/+)
MANUAL search buttons (<< / pe }
TRACK search buttons ( << / mp)
) PLAY button (» )
iO) Digit buttons {1 - 10, >10)
) Program button (PGM}
@oO
Ye)
")
WOE
Par
When the control button is pressed, the corresponding indicator
lights for about a few seconds.
In stop mode or pause mode, the display remains lit even when
DISPLAY OFF is pressed.
During peak search, the display off function cannot be carried
out even if the DISP OFF indicator lights.
Time display
During playback,
in the following sequer
track being played} ~
track being played)
the playing point to the
time of the disc)
Time (elapsed play:
in (remaining play!
Remain (remainin
d of the discl ~ @
al (total playback
@ With track No. 30 of more, the Remain time @ cannot be
F displayed.
@ During random playback, AL Remain time © cannot be
displayed.
During Program playb:
programmed tracks can t
©. The number of progr
can be displayed with the Tots
ining playback time
with the AL Remain
5 and total time of program
etting DB.
/
<PRB11G2>
En