To Next PageTo Next Page
Need help?Do you have a question about the Pioneer PD-F25 and is the answer not in the manual?
Power| power requirements (US model) | AC120V, 60Hz |
|---|---|
| power requirements (UK model) | AC220-230V, 50/60Hz |
| power consumption | 12W |
Operating Environment| operating temperature | +5°C - +35°C |
|---|---|
| operating temperature (Fahrenheit) | +41°F - +95°F |
Weight and Dimensions| weight | 3.2 kg |
|---|---|
| external dimensions | 180 (W) x 250 (H) x 268 (D) mm |
| external dimensions (inches) | 7-1/16 (W) x 9-13/16 (H) x 10-9/16 (D) in. |
Safety checks for technicians and customers.
Identifies parts with special safety characteristics and their importance.
Details packing contents and parts list for the product.
Lists external parts and their corresponding part numbers.
Lists parts specific to the front panel assembly.
Lists parts for the GM Mechanism assembly.
Lists parts for the Servo Mechanism assembly.
Notes on interpreting schematic diagrams and ordering parts.
Notes on interpreting PCB diagrams and comparing them to schematics.
Details PCB layouts for various internal board assemblies.
Lists main assemblies and their part numbers.
Lists semiconductor components for various boards.
Lists capacitor parts and their part numbers.
Lists resistor parts and their part numbers.
Lists necessary jigs, measuring instruments, and adjustment points.
Details how to start/cancel test mode and adjustment locations.
Procedure to check and adjust focus offset.
Procedure for adjusting pickup tilt in radial and tangential directions.
Procedure for checking the RF signal level.
Procedure for adjusting focus servo loop gain.
Procedure for adjusting tracking servo loop gain.
Diagram showing pin locations on the FL tube.
Assignment of anode grids for display segments.
Pin functions for the CD Control IC.
Continued pin functions and operation modes for PD4664A IC.
Describes the initial setup and power-on sequence.
Describes the operational steps when the unit is in Play Mode.
Details the AUX/CDII extension function.
Explains the memory function for storing favorite tunes.
Describes the function to scan and memorize previous discs.
Steps for disassembling the front panel.
Steps for disassembling the CD loading mechanism.
Identifies controls and indicators on the front panel.
Identifies buttons on the remote control unit.
