Do you have a question about the Pioneer PD-S705 and is the answer not in the manual?
power requirements | AC 220 - 230 V, 50/60 Hz |
---|---|
power consumption | 14W |
operating temperature | +5°C - +35°C |
---|
frequency response | 2 Hz - 20 kHz |
---|---|
signal-to-noise ratio | 110 dB or more (EIAJ) |
dynamic range | 96 dB or more (EIAJ) |
harmonic distortion | 0.0026% or less (EIAJ) |
output voltage | 2.0V |
weight | 4.2 kg |
---|---|
external dimensions | 420 (W) x 283 (D) x 125 (H) mm |
Details on product packing and component types.
Contrasts and parts list for the exterior components of different models.
Information and parts list for the front panel components.
Parts list for the loading mechanism assembly.
Parts list for the servo mechanism assembly.
Schematic diagram for the pickup assembly.
Schematic diagrams for multiple unit assemblies.
PCB diagram for main board and digital output assemblies.
PCB diagram for display and switch assemblies.
List of all PCB assemblies and their part numbers.
Specific parts list for HY and HV model types.
Specific parts list for HPW and SD model types.
Required tools and preliminary steps for adjustments.
Identifies VR locations and test points for adjustments.
Procedures for checking focus offset and tracking error.
Procedures for adjusting pickup tilt and checking RF level.
Procedures for adjusting focus and tracking servo loop gain.
Steps for removing the unit's bonnet.
Steps for removing the disc tray panel.
Steps for installing the disc tray panel.