Need help?Do you have a question about the Pioneer PL-15D-II and is the answer not in the manual?
General| Speeds | 33 1/3, 45 RPM |
|---|---|
| Platter diameter | 300 mm |
| Overhang | 15 mm |
| Platter | Aluminum |
| Tonearm | S-shaped |
| Type | Belt-drive |
| Cartridge weight range | 4 to 10g |
| Cartridge | Not included |
Superior rotation speed stability and improved signal-to-noise ratio from polyurethane belt.
4-pole synchronous motor for smooth, rumble-free performance and no speed variations.
Compensates for inward tonearm thrust to ensure fine channel separation.
Tracking force adjustable over a wide range for practically any cartridge.
Lightweight tonearm shaped for perfect geometry and minimum tracking error.
Matt finish panel and smoked dust cover for a modern aesthetic.
Select quality components for optimal performance with the turntable.
Instructions for unpacking accessories from the tonearm packing.
Steps to remove clamping screws and fit rubber bush.
How to place the turntable platter and rubber mat after setting the drive belt.
Procedure for attaching the drive belt to the motor pulley and platter.
Procedure to achieve horizontal balance of the tonearm.
How to set the tracking force using the main counterweight and dial ring.
How to use the lever to select between 33-1/3 rpm and 45 rpm speeds.
Function of the arm rest and the importance of freeing the tonearm from the clamper.
How the button stops playback, returns the tonearm, and cuts power.
Lever for controlling tonearm movement for cueing without scratching.
Use of the adaptor for playing 45 rpm EP records with large center holes.
Guidelines on frequency and spots for lubricating mechanical parts.
Steps to take after lubrication is complete, including re-fitting parts.
Causes and solutions for wow and flutter, typically related to oil or cleaning.
Explanation of howling as acoustical feedback and solutions to reduce it.
Causes and solutions for hum, mainly loose ground connections or AC cord issues.
Specifications related to the motor, drive type, speed, S/N, and platter.
Specifications for the tonearm type, length, cartridge weight, and overhang.
List of integrated features like anti-skating, arm elevation, etc.
List of included accessories with the turntable.
Specifications for power, dimensions, and weight.
To Next Page
