Need help?Do you have a question about the Pioneer PL-530 and is the answer not in the manual?
General| Drive System | Direct Drive |
|---|---|
| Motor | Quartz PLL Hall Motor |
| Wow and Flutter | 0.03% WRMS |
| Tonearm Type | Static-balanced type, S-shaped pipe arm |
| Effective Length | 221 mm |
| Overhang | 15.5 mm |
| Weight | 10.5 kg |
| Cartridge Weight Range | 4 to 10 g |
| Platter | Aluminum Die-cast |
| Speeds | 33 1/3, 45 RPM |
Details motor type, turntable platter, moment of inertia, speeds, and speed control range.
Covers tonearm type, effective arm length, overhang, and usable cartridge weight.
Presents the detailed schematic diagrams for the S type turntable, including circuit layouts and component connections.
Provides the schematic diagram and component list for the drive control assembly (PWG-009).
Presents the schematic diagram and parts list for the S type power supply assembly (PWR-821).
Details the feedback circuit used for speed control, involving diodes, transistors, and voltage comparison.
A diagnostic flowchart to identify causes when the motor fails to turn, checking voltages and resistances.
A troubleshooting guide for issues related to wide variations in motor speed, checking voltages and components.
Provides steps to diagnose and resolve motor "racing" issues, checking voltages and connections.
Guides on adjusting the tonearm lowering position using a screw for accurate stylus placement.
Details adjustments for tonearm return and elevation, including stopper angle and separation height.
Procedures for setting auto return start point, defective tonearm operation torque, and switch spacing.
To Next Page
