Need help?Do you have a question about the Pioneer PL-520 and is the answer not in the manual?
Motor and Turntable| motor type | DC servomotor (8 pole 24 slot) |
|---|---|
| turntable platter diameter | 330 mm |
| inertial mass | 200 kg-cm? |
Speed and Control| speeds | 33-1/3 and 45 rpm |
|---|---|
| speed control range | 22% |
| wow and flutter | Less than 0.03% (WRMS) |
Tonearm Specifications| tonearm type | Static-balance type, S-shaped pipe arm |
|---|---|
| effective arm length | 221 mm |
| overhang | 155 mm |
Power| power requirements | AC 110V/120V/220V/240V~ (switchable), 50/60Hz |
|---|---|
| power consumption | 8 W |
| output voltage | 2.5 mV (1kHz, 50mm/s Peak Velocity, LAT) |
Weight and Dimensions| dimensions | 460(W) x 395(D) x 171(H) mm |
|---|---|
| dimensions (inches) | 18-1/8(W) x 15-9/16(D) x 6-3/4(H) in |
| weight | 8.5 kg/18 lb |
Features a high-precision phonomotor with Hall elements for accurate speed control and high inertia platter.
Features excellent trackability with built-in lateral balance and anti-skating mechanisms for precise stylus tracking.
Crucial advice on avoiding direct sunlight, dust, vibration, and proximity to amplifiers to prevent damage.
How to balance the tonearm by adjusting the counterweight for horizontal alignment.
Method for adjusting the stylus tracking force using the calibrated scale on the tonearm bar.
Guide on using strobe calibration dots and fine adjustment knobs to set accurate platter speeds.
Important warnings regarding record size selection, stylus cleaning, vibration, and tonearm handling.
Steps to adjust the stylus descent position using the adjusting screw for accurate track landing.
Table outlining common operational issues, possible causes, and suggested solutions for the turntable.
To Next Page
