Need help?Do you have a question about the Pioneer PL-55X and is the answer not in the manual?
Details on the motor type, drive system, speed, wow/flutter, S/N, and platter.
Specifications for the tonearm type, effective length, cartridge weight, and overhang.
Description of tonearm system features like auto-return, skating force canceler, and arm elevation.
List of accessories provided with the turntable, such as weight plate and record adaptor.
Information on power requirements, power consumption, outer dimensions, and weight.
Explanation of how to use the stroboscope for speed checking and the strobolight function.
Instructions on using the protective cover for the cartridge stylus when the unit is not in use.
Details on the operation of the function lever for starting, pausing, and stopping playback.
Information about the 45 RPM record adaptor for playing EP records with large center holes.
Explanation of the motor control construction and how the pole position detector and driver circuits function.
Step-by-step guide on preparing the turntable and initiating playback of a record.
Description of the automatic tonearm return sequence when a record ends or is interrupted.
Instructions on how to manually stop the turntable operation using the function lever.
Troubleshooting steps for when the tonearm fails to return to its rest position after playing.
Diagnosing and fixing issues where the tonearm returns before the record finishes.
Guidance on adjusting the tonearm return speed if it is too slow or too fast.
Troubleshooting for the tonearm stopping its return motion before reaching the arm rest.
Steps to adjust the tonearm height to prevent it from hitting the inside of the arm rest.
Correcting issues where the tonearm hits and bounds within the arm rest area.
Procedure for adjusting the speed of the arm elevator's vertical movement.
Troubleshooting steps for when the turntable fails to start or stop correctly.
Adjusting the shorting switch contacts to prevent noise during tonearm return.
A general procedure for making various adjustments to the turntable mechanism.
Instructions for adjusting the motor speed when fine speed controls are insufficient.
Introduction to the schematic diagrams and PC board patterns included in the manual.
Detailed schematic diagram for the power supply circuit assembly (KWR-033).
Detailed exploded view of the turntable's main panel and its components.
Detailed exploded view of the auto return assembly (PXA-056) and its parts.
Detailed exploded view of the speed selector assembly (KXA-766) and its components.
Detailed exploded view of the turntable's tone arm and its associated parts.
Detailed exploded view of the main circuit board and its mounting hardware.
Detailed exploded view of the anti-skating assembly (KXB-216) and its parts.
Detailed exploded view of the PU-plate assembly (PXA-065) and its components.
Detailed exploded view of the power supply circuit assembly (KWR-033) and its parts.
Detailed exploded view of the start lever assembly (KXA-761) and its components.
Detailed exploded view of the upper board, dust cover, and associated hardware.
Detailed exploded view of the under board, insulators, and bottom cover.
Instructions and diagrams for packing the turntable for shipping or storage.
Detailed exploded view of the accessory case and the items it contains.
To Next Page
General
