Pioneer PL-514 User Manual

STEREO
TURNTABLE
L=-514
OPERATING
INSTRUCTIONS
KUT
IMPORTANT NOTICE
The serial number for this equipment is }——
located on the rear.
Please write this serial number on your|__
enclosed
warranty
card
and
keep
in
a
secure area. This is for your security.
Metal-like vinyl
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR ;}—
WMPIONEER'
MOISTURE.
{

Pioneer PL-514 Specifications

Motor and Turntable

drive system	Belt-drive
motor	4-pole synchronous
turntable platter diameter	320 mm
speeds	33-1/3 and 45 rpm
wow and flutter	Less than 0.055% (WRMS)
signal-to-noise ratio	More than 65 dB (DIN-B)

Tonearm

type	Static-balance type, S-shaped pipe arm
effective arm length	221 mm
overhang	15.5 mm
tracking error	0.525 deg./in, 0.21 deg./cm
usable cartridge weight	4 g to 10 g

Power and Dimensions

power requirements	AC 120V, 60Hz
power consumption	10 W
dimensions	440(W) x 140(H) x 365(D) mm
weight	7.5 kg / 16 lb 8 oz

Summary

Attaching the Cartridge

Attaching Headshells Not Made by Pioneer

Procedure for attaching non-Pioneer headshells, ensuring alignment and connection compatibility.

Assembly Procedure

How to Attach the Drive Belt

Step-by-step guide for correctly installing the drive belt onto the motor pulley and platter.

Adjusting the Tonearm

Level Balance Adjustment

Steps to balance the tonearm to be parallel with the platter for proper tracking.

Tracking Force Adjustment

Procedure for setting the correct tracking force using the counterweight and scale ring.

Anti-Skating Adjustment

Method for adjusting the anti-skating mechanism based on tracking force requirements.

Connections

Maintenance

Lubrication

Instructions for applying lubricating oil to ensure continued high performance and longevity.

Cabinet

Guidelines for cleaning the turntable's cabinet and precautions against moisture and chemicals.

Panel Facilities and Operation

Operating Procedures

Step-by-step guide on how to play a record from start to finish.

Operation Precautions

Important precautions to avoid damage to the stylus, record, and turntable during operation.

Troubleshooting

Specifications