Need help?Do you have a question about the Pioneer PL-51 and is the answer not in the manual?
Motor and Turntable| motor type | DC servo motor |
|---|---|
| speed | Two speeds: 33-1/3 rpm, 45 rpm |
| wow and flutter | 0.06% (WRMS) or less |
| signal-to-noise ratio | 55dB or more |
| turntable platter diameter | 31 cm |
| turntable platter material | Aluminum-diecast alloy |
Tonearm| tonearm type | Static balance, S-type, pipe arm |
|---|---|
| effective arm length | 221 mm |
| tracking error | +3° ~ -1° |
| overhang | 15.5 mm |
| usable cartridge weight | 4 g (min) ~ 14 g (max) |
Power and Dimensions| power requirements | AC 120V, 60Hz |
|---|---|
| power consumption | 5.2 W (max) |
| outer dimensions | 480(W) x 410(D) x 185(H) mm |
| weight | 11 kg |
Features an exactly-balanced tonearm and anti-skating for stable record tracking.
Guide for mounting the cartridge and attaching the head shell.
Procedures for setting tonearm level balance and the correct tracking force.
How to adjust the lateral balance weight for optimal stereo response.
Describes acoustical feedback from speakers and potential solutions.
Explains low-pitch droning noise from loose ground connection or proximity to transformer.
To Next Page
