To Next PageTo Next Page
Need help?Do you have a question about the Pioneer PL-570 and is the answer not in the manual?
General| Drive Type | Direct Drive |
|---|---|
| Automatic Operation | Fully Automatic |
| Signal to Noise Ratio | 70dB |
| Motor | Quartz PLL Hall Motor |
| Effective Arm Length | 221mm |
| Overhang | 15mm |
| Power Requirements | AC 120V, 60Hz |
| Speeds | 45 RPM |
| Platter | Aluminum Die-Cast |
| Tonearm Type | Static Balance |
| Cartridge Weight Range | 4 to 10g |
| Output Voltage | 3.5mV |
| Tracking Force Range | 0-3g |
Covers motor, turntable, speeds, rotational characteristics, tonearm, and subfunctions.
Lists semiconductors, miscellaneous items like power/dimensions/weight, and accessories.
Notes specifications and design subject to change without notice.
Schematics for Drive Control Assy PWG-011 and Detector Assy PWX-011.
Schematic diagram for the Power Supply Assembly PWR-834.
Includes Positional Detector, Gear Motor, Line Voltage Selector, and other system components.
Lists transistors and bridge rectifiers used in the power supply.
Details of resistors used in the power supply assembly, including type and value.
Lists capacitors, fuses, and heat sinks for the power supply.
Lists transistors and ICs used in the auto return detector assembly.
Details of resistors used in the detector assembly, including type and value.
Lists capacitors and semi-fixed resistors for the detector assembly.
Exploded view of the main turntable unit, showing major components and their part numbers.
Exploded view of power supply, AC inlet, and line voltage selector.
Exploded view of the timing motor and related components on sub panel 1.
Steps for adjusting the 45 RPM reference time using an oscilloscope.
Steps for adjusting the 33 RPM reference time using an oscilloscope.
Important note regarding the order of adjustments for correct performance.
