Pioneer PL-201Z User Manual

ervice
CIRCUIT
DESCRIPTIONS
OX
REPAIR
&
ADJUSTMENTS
}
ORDER
NO.
ARP-459-0
STEREO TURNTABLE
PL-2002
PL-201Z
MODEL PL-200Z COMES IN TWO VERSIONS DISTINGUISHED AS FOLLOWS:
(DC power supply) Australia, European continent and West Germany models
(DC power supply) U.S. Military model :
Voltage Remarks
(DC power supply) U.S.A, Canada, United Kingdom and West Germany models
@ This service manual is applicable to the PL-200Z/ZEM type.
© Both model PL-200Z and PL-201Z have the same basic mechanism and performance. The only difference
is
in
appearance.
,
@ For servicing of the PL-200Z/Z/G and PL-201Z/ZUBM types, please see 20 page.
@ Ce manuel d ‘instruction se rerére au mode de réglage en frangais.
@ Cste manual de servicio trata del método de ajuste escrito en espajfiol.
PIONEER ELECTRONIC CORPORATION <--1, Meguro 1-Chome, Meguro-ku, Tokyo 153, Japan
PIONEER ELECTRONICS [USA] INC. P.O. Box 1760, Long Beach, California 90801 U.S.A.
TEL: (B00) 421-1404, [213] 420-5914
PIONEER ELECTRONIC [EVUROPE]N.V. Keetberglaan 1, 2740 Beveren, Belgium TEL: 03/775:-28:08
PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 580-9911 ,
FG© MAR. 1984 Printed in Japan

Pioneer PL-201Z Specifications

General

Brand	Pioneer
Model	PL-201Z
Category	Turntable
Language	English

Summary

1. SPECIFICATIONS

Drive System and Performance Specs

3. DISASSEMBLY PROCEDURE

Mechanism and Motor Removal Steps

Step-by-step guide for removing the mechanism assembly and motor.

Tone Arm Assembly Removal Steps

Instructions for detaching and removing the tone arm assembly.

4. ELECTRICAL PARTS LIST

Component Identification and Ordering Notes

6. SCHEMATIC DIAGRAM

9. REASSEMBLY PRECAUTIONS

Lubrication Points and Lubricant Types

Component Attachment and Reassembly Tips

10. ADJUSTMENTS

Auto-Return Position Adjustment

Steps to adjust the auto-return mechanism for proper operation.

Arm Elevation Height Adjustment

Procedure to set the correct height for the tonearm elevation.

Motor Speed Calibration Procedure

Instructions for adjusting motor speeds using VR1 and VR2 for 33 1/3 and 45 RPM.