To Next PageTo Next Page
Need help?Do you have a question about the Pioneer PL-255 and is the answer not in the manual?
General| Weight | 5.5 kg |
|---|---|
| Motor | DC Servo Motor |
| Effective Arm Length | 221 mm |
| Overhang | 15.5 mm |
| Speed | 33-1/3, 45 rpm |
| Tonearm | Static-balance type |
| Cartridge | Moving Magnet |
| Platter | Aluminum die-cast |
| Dimensions | 420 x 100 x 375 mm |
| Wow and Flutter | 0.045% WRMS |
| Cartridge Type | Moving Magnet (MM) |
| Signal to Noise Ratio | 65 dB (DIN-B) |
Procedure for removing the panel and base plate components.
Steps for disassembling the direct drive motor and tonearm assembly.
Instructions for assembling the panel and base plate for PL-200 and PL-300 models.
Instructions for assembling the panel and base plate for PL-255 and PL-400 models.
Illustrates the circuit connections for PL-300 and PL-400 models.
Details the construction and rotational principles of the motor.
Explains the function of the PD1003 IC in the oscillator stage.
Describes the role of the PA2004 IC in comparator control.
Details the function of the PA2005 IC for drive control.
Illustrates the circuit connections for PL-200 and PL-255 models.
Explains the operational sequence for the PL-200 mechanism, including start and auto-return.
Details the mechanical operation for lead-in and auto-return of the PL-400.
Guide for adjusting the stylus descent position for automatic play.
Procedure for adjusting the auto return mechanism.
Steps for adjusting the D.D. motor for PL-300 and PL-400 models.
Steps for adjusting the D.D. motor for PL-200 and PL-255 models.
