Need help?Do you have a question about the Pioneer PL-41A and is the answer not in the manual?
General| Type | Manual turntable |
|---|---|
| Speeds | 33 1/3 and 45 rpm |
| Signal to noise ratio | 50 dB |
| Effective length | 221 mm |
| Overhang | 15 mm |
| Cartridge weight range | 4 to 10g |
| Cartridge | Not included |
| Wow and flutter | 0.08% (WRMS) |
| Platter | Aluminum die-cast |
| Tonearm | Static-balance type |
| Motor | 4-pole synchronous motor |
Connect the output cord and mount the tonearm unit into the base plate, ensuring proper alignment.
Balance the tonearm horizontally and set the stylus pressure dial to zero grams.
Adjust the lateral balancing weight to ensure the tonearm remains centered when the base is tilted.
Set the stylus pressure to the recommended 2-3 grams for optimal playback.
Adjust tracking balance to counteract skating force, aligning the indicated value with the bias mark.
Step-by-step guide to placing a record, starting the turntable, and lowering the tonearm.
Addresses hum, buzz, and howling by checking connections, cord placement, and speaker distance.
To Next Page
