Need help?Do you have a question about the Pioneer PL-61 and is the answer not in the manual?
General| Speeds | 33 1/3 and 45 RPM |
|---|---|
| Overhang | 15 mm |
| Cartridge | Not included |
| Type | Belt Drive |
| Platter | Aluminum |
| Tonearm | S-shaped tonearm |
Brushless Hall motor and electronic servo control for stable speed.
S-type tonearm, balance, anti-skating, and cartridge features.
Place unit in a well-ventilated area, away from direct sun, heat, and speakers.
Adjust voltage selector plug for correct house current (110V-240V).
Balancing the tonearm horizontally using the main counterweight.
Setting the anti-skating force based on tracking force.
Adjusting the tracking force using the dial ring and counterweight.
Procedure for replacing the stylus on the supplied cartridge.
Instructions for mounting a different cartridge and adjusting overhang.
Describes the Hall element as a transducer for motor control.
Explains how the servo system maintains constant motor speed.
To Next Page
