Pioneer SC-LX82 - Page 59

59
SC-LX82
5
6 7 8
5
6 7 8
A
B
C
D
E
F
FL Display LED flashes Status Timing (sec.) Description Remarks
[2] Error Indications
(1) Over Current NA
When the overload USB device (over 500 mA) is connected.
Warning indication for HDMI Simplay
Flashes 5 seconds
The connected USB device is overload. The 12V trigger circuit is short-circuited, and a overcurrent is generated.
(2) HDCP ERROR NA
When an HDCP ERROR is detected.
Flashes
(3) 12V TRG ERR NA
When the 12V trigger circuit is short-circuited.
The Icon “OVER” lights
(4) NANA
When the ANALOG INPUT OVER is detected.
Icon lights 1 second
While the Icon lights 1 second, when the ANALOG INPUT OVER is detected again, the Icon continues to light 1 second more from that time. While the Icon lights 1 second, when there is no ANALOG INPUT OVER detection, the Icon stops lighting and returns to normal display.