Need help?Do you have a question about the Pioneer sc-lx86 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Output impedance | 6 Ω |
| Speaker selector | A+B |
| Audio output channels | 9.1 channels |
| Total Harmonic Distortion (THD) | 1 % |
| Power output per channel (1KHz@6 Ohm) | 190 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 8 |
| AC (power) in | Yes |
| Remote (IR) input | 1 |
| Composite video in | 4 |
| Digital audio optical in | 2 |
| Multichannel audio input type | RCA |
| Component video (YPbPr/YCbCr) in | 3 |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| Supported radio bands | AM, FM |
| Optical drive included | No |
| Display | - |
| Product color | Black |
| Audio decoders | Dolby Digital, Dolby Digital Plus, Dolby Pro Logic, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS 96/24, DTS-ES, DTS-HD, DTS-HD Master Audio |
| Apple docking compatibility | iPad, iPhone, iPod |
| On Screen Display (OSD) languages | DEU, DUT, ENG, ESP, FRE, ITA, RUS |
| Graphical user interface (GUI) language | English, French, German, Italian, Russian, Spanish |
| AC input voltage | 230-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.1 W |
| Power consumption (typical) | 370 W |
| THX-certified | THX Select2 Plus |
| Cables included | AC |
Covers warnings about electric shock, water, fire hazards, ventilation, and operating environment.
How to safely set the voltage selector switch for proper operation.
Guidance on proper installation of the receiver to ensure stability and safety.
Detailed steps for the expert automatic MCACC setup procedure.
Instructions for manually fine-tuning speaker settings and calibration.
Guide to adjusting receiver settings using the Advanced MCACC menu.
Fine-tuning speaker positions for accurate distance calibration.
Viewing calibrated settings for speaker system and levels.
Managing MCACC presets for identification, copying, and clearing.
Adjusting the overall balance of speaker system levels.
Manually adjusting speaker system frequency balance.
Making precise delay settings for speaker system distances.
Calibrating system based on direct sound for room reverberation.
Common problems and their solutions for the receiver.
Troubleshooting steps for no subwoofer sound output.
Troubleshooting steps for video output and display problems.
Troubleshooting for remote control operation problems.
Troubleshooting steps for power-related issues.
Troubleshooting steps for a single speaker not producing sound.
Troubleshooting specific to HDMI connections.
Solutions for scenarios where no sound is output.
Step-by-step guide for connecting and initial setup of the receiver.
Steps for performing automatic speaker setup and calibration.
Steps for fine-tuning audio and video settings.
Overview of the receiver's remote control buttons and functions.
Description of the controls and connectors on the receiver's front panel.
Overview of the receiver's rear panel terminals for connections.
Guide to selecting speaker layouts and usage patterns.
Speaker connection diagram for a 9.2 channel system.
Connection for 7.2 channel system with front height/wide and Zone 2.
Connection for 5.2 channel system with Zone 2 and Zone 3.
How to connect the receiver to a network via LAN for Internet and PC access.
Guide to connecting TVs and playback devices using HDMI.
Speaker connection for a 7.2 channel system with Speaker B.
Connection for 7.2 channel system with surround back and Zone 2.
Connection for 5.2 channel system with bi-amping and Zone 2.
Instructions for making secure speaker wire connections.
Final steps for connecting the power cord and outlet.
How to assign input functions to rear panel terminals.
How to select between Expert and Basic operation modes.
Guide to performing automatic surround sound setup.
Solutions for issues encountered during the Auto MCACC setup process.
Using Phase Control for coherent sound reproduction.
Using FRONT ALIGN with Full Band Phase Control for calibration.
How to select and use saved MCACC presets.
Utilizing Phase Control and Full Band Phase Control for improved sound.
Explanation of the Control with HDMI function for synchronized operation.
Adjusting various sound-related settings like EQ, delay, and tone.
Configuring network settings via a web browser.
Procedure to reset all receiver settings to factory defaults.
Steps to configure network settings for Internet and PC access.
Setting IP address and port for proxy server connection.
Procedure for updating receiver software via Internet or USB.
Detailed guide for manual speaker configuration and adjustments.
Configuring IP address and proxy settings for network connectivity.
How to select the appropriate speaker system configuration.
Guidance on optimal speaker placement and adjustment.
Key details and configurations for HDMI connections.
Technical specifications for the receiver's amplifier section.
Technical specifications for the receiver's tuner section.
Technical specifications for the receiver's audio inputs and outputs.
To Next Page
