Key operation FL display
Display CEC(TEST) state.
Display FAN(TEST) state.
The Timer of Exception
"Set Stream Path".
[↓]
[↑]
[↓]
[↑]
EX SSP
CEC
OFF
FAN
CEC
ON
OFF
1500ms
600ms
Resetting the number of
times error is detected.
[↓]
[↑]
RESET
RESET
RESET
RESET
HOLD
CLEAR?
Resetting the number of times error is detected
Key operation FL display
↓
Continued
[ENTER]
[←][→]
Display CEC(TEST) state.
Key operation FL display
↓
Change cyclically
[←][→]
EX SSP
Setting of the Timer of Exception “Set Stream Path”.
Key operation FL display
↓
Change cyclically
[←][→]
FAN
ON
Key operation FL display
↓
Change cyclically
[←][→]
Change cyclically
Display accumulated
time & RESET.
[↓]
[↑]
CL?
RST
12345h20m
12345h 20m
0h 0m
HLD
Resetting the accumulated time
Key operation FL display
↓
Continued
[ENTER]
[←][→]
[Description]
CEC TEST : The function for making the HDMI output terminal to output 1kHz square wave.
If the square wave is output, the CEC line is considered to be normal.
FAN TEST : The function for making the FAN to be forced to rotate.
To Next Page
Loading...
