To Next PageTo Next Page
Need help?Do you have a question about the Pioneer VSX-1120-K and is the answer not in the manual?
Power| power requirements | AC 120 V/60 Hz |
|---|---|
| power consumption | 400 Watts |
| standby power consumption | Less than 0.2 Watts |
Weight and Dimensions| width | 16.55 inches |
|---|---|
| height | 6.82 inches |
| depth | 17.06 inches |
| weight | 28.7 lbs |
Lists key capabilities of the receiver, including Advanced Direct Energy design and HDMI support.
Lists accessories included with the receiver, such as setup microphone and remote control.
Guidelines for placing and installing the receiver unit on a stable surface, avoiding certain locations.
Explains the operation and layout of the remote control, including component control color-coding.
Describes the buttons and indicators on the receiver's front panel for direct operation.
Details the information shown on the receiver's display screen, including signal and format indicators.
Identifies and explains the input/output terminals on the receiver's rear panel.
Guides on setting up different surround speaker configurations like 7.1 or 5.1 systems.
Instructions on how to connect speaker cables to the receiver's terminals.
Explains HDMI connections, features like HDCP and 3D signal transfer, and audio formats.
Step-by-step guide for connecting TV and playback components via HDMI for audio and video.
How to adjust speaker impedance settings for 6 or 8 ohm speakers.
Guides for automatically calibrating sound settings using the MCACC system.
How to configure input assignments for connected components.
Basic instructions for playing audio/video sources through the system.
How to connect and play music from an iPod using the receiver.
Instructions for playing audio and photo files from a USB device.
Steps for tuning into FM and AM radio stations.
Explains the Auto Surround feature for automatic source detection and playback.
Details various modes for experiencing surround sound with different sources.
Explains THX technologies for cinema and home theater sound.
How to establish synchronized operations between components via HDMI.
Configuration settings for HDMI features like Control with HDMI and TV Audio.
Information on the PQLS function for high-quality digital audio transfer.
Adjusts various sound parameters like Tone, EQ, S.RTRV, DRC, etc.
Adjusts picture settings like resolution, brightness, contrast, and aspect ratio.
Manages audio playback in a second zone using receiver controls.
Procedure to reset all receiver settings to factory defaults.
How to control multiple Pioneer receivers with one remote.
Guides on programming the remote to control TVs, DVD players, etc.
Resets programmed remote control settings for a specific input function.
Features for programming sequences of commands for multiple components.
Overview of accessing and using the Advanced MCACC features.
Detailed steps for advanced automatic surround sound calibration.
Instructions for manually fine-tuning speaker settings and EQ.
How to view calibrated settings and parameters from MCACC.
Accessing manual settings for speakers, inputs, OSD, and network.
Detailed manual configuration of speaker size, levels, and distances.
Specifies how surround back, front height/wide, or speaker B terminals are used.
Configures speaker size, number, and crossover frequency for optimal sound.
Common problems and their solutions for receiver operation and features.
Troubleshooting specific issues related to HDMI connections and performance.
Technical details and specifications of the receiver's hardware.
Details the terms and conditions of the product warranty.
