Need help?Do you have a question about the Pioneer VSX-45TX Elite and is the answer not in the manual?
General| Type | AV receiver |
|---|---|
| Channels | 7.1 |
| Total Harmonic Distortion | 0.09% |
| Input Sensitivity | 200 mV |
| Signal to Noise Ratio | 100 dB |
| Digital Inputs | 3 optical, 2 coaxial |
| DSP | Yes |
| Frequency Response | 5 Hz - 100 kHz |
| Video Connections | 3 composite |
| Tuning range | AM/FM |
| Outputs | Zone 2 |
| Surround Sound Formats | Dolby Digital, DTS |
| Audio D/A Converter | 24-bit/192kHz |
System for easy surround sound setup and optimization.
Compatibility with advanced audio and video formats including HD.
Compatibility with high-end audio formats like DVD Audio and SACD.
Instructions on how to load batteries into the remote control.
Guide to connecting DVD player and TV for digital audio and video.
Instructions on connecting up to seven speakers and a subwoofer.
Procedure to assign digital inputs for proper component recognition.
Automatic system setup using the MCACC system and microphone.
Steps to play a DVD and adjust master volume for surround sound.
Instructions for connecting video sources like DVD players.
Guide for connecting digital audio sources like CD players and satellite tuners.
Detailed guide for connecting speakers to the receiver.
Recommendations for optimal speaker placement for surround sound.
Explanation of controls and indicators on the receiver's front panel.
Detailed description of buttons on the remote control.
Setting options for using surround back speakers.
A simple, manual setup method for surround sound.
A more detailed manual setup for surround sound parameters.
Selecting the correct settings for speaker type and number.
Balancing the sound output levels of individual speakers.
Adjusting speaker delay based on distance for precise sound.
Explanation of different listening modes for surround sound.
Description of movie-focused surround sound modes.
Description of music-focused surround sound modes.
Instructions for programming the remote to control other devices.
Procedure to reset the receiver to factory default settings.
Configuring digital input assignments for components.
Reassigning component video input functions.
Advanced settings for fine-tuning surround sound.
Setting the frequency point for dividing sound between speakers and subwoofer.
Finely balancing the sound output level of individual speakers.
Adjusting speaker delay levels for precise sound imaging.
Room equalization settings for speaker optimization.
Guidelines for optimal speaker placement for surround sound.
Solutions for common power, setup, and audio issues.
To Next Page
