Do you have a question about the Pioneer XW-LF3-T and is the answer not in the manual?
Type | Wireless Speaker |
---|---|
Frequency Response | 50 Hz - 20 kHz |
AUX | Yes |
USB | Yes |
Battery Life | Up to 10 hours |
Dimensions | 280 x 150 x 130 mm |
Weight | 1.6 kg |
Power Source | Rechargeable Battery |
NFC | Yes |
Charging Time | 4 hours |
Connectivity | Bluetooth, AUX, USB |
Power Output | 20 Watts |
Output Power | 20 Watts |
Prevent risk of electric shock by not removing covers. Refer servicing to qualified personnel.
Equipment is not waterproof. Avoid liquids, dripping, splashing, rain, or moisture.
Do not place naked flame sources, like lighted candles, on the equipment.
Ensure adequate space for ventilation to improve heat radiation and prevent overheating.
Unplug the unit from the AC outlet to shut off all power; disconnect when unused.
Avoid storing batteries in direct sunlight or hot places to prevent leakage, overheating, or explosion.
Keep small parts out of reach of children and infants to prevent accidental swallowing.
Handle power cord by plug, avoid wet hands, pinching, and knots for safety.
Proper handling of AC adapter, avoiding wet hands, ensuring full insertion, and using stable outlets.
Critical warnings about battery handling, including fire, leakage, and rupture risks.
Guidelines for safe charging, temperature ranges, and avoiding heat sources to prevent fire.
Procedures for handling battery fluid contact with eyes or skin to prevent injury.
Guidelines for installing the unit on a level surface and avoiding specific locations.
Cautions on how to use, carry, and place the unit to prevent damage or injury.
Essential safety guidelines for personal safety and maximizing unit potential.
Safety regarding power cord handling, short circuits, overloading, and liquid entry.
Inspect AC adapter and power plug for irregularities before use. Seek repair if damaged.
Avoid using items like coins or paper clips with the AC adapter to prevent short circuits or shocks.
Ensure proper fit with wall outlets and safe detachment of power plugs to prevent hazards.
Initial registration process to establish communication between the unit and a Bluetooth device.
Use the unit for making and receiving hands-free calls via Bluetooth.
Detailed steps for removing the battery and disconnecting connectors safely.
Addresses common problems like no power, charging issues, and short battery life.
Solutions for unit control problems, incorrect functioning, and automatic standby mode.
Troubleshooting steps for Bluetooth connection, sound emission, and pairing failures.
Troubleshooting for not hearing the other party or the ringtone during hands-free calls.